Search results
Results from the WOW.Com Content Network
depth, deep, down: Defines the depth of a feature. ⌀ [2] diameter: Diameter of a circle. In a feature control frame , the ⌀ symbol tells you that the tolerance zone for the geometric tolerance is cylindrical. Abbreviations for "diameter" include ⌀, DIA, and D. D: diameter; delta: Abbreviations for "diameter" include ⌀, DIA, and D.
The surface is frequently installed upon and supported by cabinets, positioned at an ergonomic height for the user and the particular task for which it is designed. A countertop may be constructed of various materials with different attributes of functionality, durability and aesthetics, and may have built-in appliances, or accessory items ...
depth: "distance of a point from a chosen reference surface measured downward along a line perpendicular to that surface." [1] height: "distance of a point from a chosen reference surface measured upward along a line perpendicular to that surface"; [1] ISO 6709 (2008 version) makes the following additional definition:
Chinese dual sockets have both an unearthed socket complying with figure 5 of GB 1002-2008 (both flat pin and 4.8 mm round pin), and an earthed socket complying with figure 4 of GB 1002-2008. Both Thai and Chinese dual sockets also physically accept plugs normally fitted to 120 V appliances (e.g. 120 V rated NEMA 1-15 ungrounded plugs).
This height is usually about one foot above the height of a person's head and this is where the pots should be located. The second measurement needed is the height of the ceiling. The third measurement is the height of the pot rack with the hooks. The height of the ceiling minus the reaching height is the required height of the pot rack and chains.
On average, they weigh about 3-7 pounds and stand at just 8-14 inches in height. Don't let their small size fool you; The AKC describes them as, " ...
BS 546, Two-pole and earthing-pin plugs, socket-outlets and socket-outlet adaptors for AC (50–60 Hz) circuits up to 250 V is an older British Standard for three-pin AC power plugs and sockets. Originally published in April 1934, it was updated by a 1950 edition which is still current, [1] with eight amendments up to 1999. BS 546 is also the ...
In use, the spigot of one segment was placed into the socket of the preceding one, and a ring of oakum was forced down into the joint with a caulking iron. Then the remainder of the space in the hub was filled up. Ideally, this would be done by pouring molten lead, allowing it to set, and hammering it tightly with a caulking tool.