Search results
Results from the WOW.Com Content Network
Black powder cartridge refers to firearms ammunition from the period after the introduction of metallic cartridge, but prior to the wide adoption of smokeless powder.These cartridges (frequently but not always single-shot) had adopted the new technology of complete cartridges including a brass casing which held the powder charge, bullet, and primer.
It was available in a number of loadings with bullets weighing from 270 to 365 grains (17.5 to 23.7 g), all driven by 120 grains (7.8 g) of black powder. [1] [3] The .450 Nitro for Black is the same cartridge loaded with mild loadings of modern smokeless powder, carefully balanced through trial to replicate the ballistics of the black powder ...
The .500/450 No. 1 Nitro for Black was the same cartridge loaded with mild loadings of cordite, carefully balanced to replicate the ballistics of the black powder version. Unlike other similar black powder cartridges, such as the .450 Black Powder Express and .500/450 Magnum Black Powder Express, the .500/450 No. 1 Express never became a Nitro ...
Each M6 ammo can contained 16 cartons (800 rounds). There were 4 × M6 ammo cans per crate. T1CAH = 2,400 cartridges of .30 Carbine Ball M1, Grade R, in 50-round cartons packed in M6 ammo cans. Each M6 ammo can contained 16 cartons (800 rounds). There were 3 × M6 ammo cans per M4 crate. Gross Weight: 85 lbs. Volume: 0.87 cubic feet.
The .45 BPM can be handloaded using a .460 S&W Magnum brass casing, a standard large pistol primer, from 40 grains black powder with filler as necessary to avoid air gaps on up to 60 grains black powder. A typical bullet would consist of soft lead from 150 to 250 grains in weight with a black powder appropriate lubricant in the groove(s).
[3]: 287–289 Nitrocellulose produces greater volumes of gas per volume of solid than black powder does, so nitrocellulose bulk powders were less dense than later smokeless powders. Nitrocellulose bulk powders designed for early straight-sided black powder rifle cartridges like the .32-40 and .38-55 were friable and easily crumbled. The ...
The C was to indicate the powder burned "cooler" than traditional Improved Military Rifle (IMR) powders. [4] In 1949, he began acquisition of powder salvaged from disassembled Oerlikon 20mm cannon cartridges. This powder resembled IMR 4350 in appearance, and with a slower burning rate, was initially marketed as "4350 Data", and later as 4831. [5]
The .577/500 No. 2 BPE was developed as a black powder round some time before 1879 by necking down the .577 Black Powder Express to .507-inches (12.9 mm) [2] for use in single or double rifles, as well as a variety of Martini-based lever rifles.