Search results
Results from the WOW.Com Content Network
The wind frame is a convenient frame to express the aerodynamic forces and moments acting on an aircraft. In particular, the net aerodynamic force can be divided into components along the wind frame axes, with the drag force in the −x w direction and the lift force in the −z w direction. Mnemonics to remember angle names
Both aircraft have a similar wing area, again reflecting the Mustang's superior aerodynamics in spite of much larger size. [1] In another comparison with the Camel, a very large but streamlined aircraft such as the Lockheed Constellation has a considerably smaller zero-lift drag coefficient (0.0211 vs. 0.0378) in spite of having a much larger ...
Drag coefficients in fluids with Reynolds number approximately 10 4 [1] [2] Shapes are depicted with the same projected frontal area. In fluid dynamics, the drag coefficient (commonly denoted as: , or ) is a dimensionless quantity that is used to quantify the drag or resistance of an object in a fluid environment, such as air or water.
The aerodynamic forces are generated with respect to body axes, which is not an inertial frame. In order to calculate the motion, the forces must be referred to inertial axes. This requires the body components of velocity to be resolved through the heading angle () into inertial axes. Resolving into fixed (inertial) axes:
In aerodynamics, the lift-to-drag ratio (or L/D ratio) is the lift generated by an aerodynamic body such as an aerofoil or aircraft, divided by the aerodynamic drag caused by moving through air. It describes the aerodynamic efficiency under given flight conditions. The L/D ratio for any given body will vary according to these flight conditions.
where is the reference length that should always be specified: in aerodynamics and airfoil theory usually the airfoil chord is chosen, while in marine dynamics and for struts usually the thickness is chosen. Note this is directly analogous to the drag coefficient since the chord can be interpreted as the "area per unit span".
It is useful for predicting aircraft handling, aerodynamic loads, stalling etc. = where ρ is actual air density and ρ 0 is standard sea level density (1.225 kg/m 3 or 0.00237 slug/ft 3). EAS is a function of dynamic pressure:
In larger aircraft, weight and balance is often expressed as a percentage of mean aerodynamic chord, or MAC. For example, assume the leading edge of the MAC is 62 inches aft of the datum. Therefore, the CG calculated above lies 32 inches aft of the leading edge of the MAC. If the MAC is 80 inches in length, the percentage of MAC is 32 / 80 = 40%.