Search results
Results from the WOW.Com Content Network
Ferrocement or ferro-cement [1] is a system of construction using reinforced mortar [2] or plaster (lime or cement, sand, and water) applied over an "armature" of metal mesh, woven, expanded metal, or metal-fibers, and closely spaced thin steel rods such as rebar. The metal commonly used is iron or some type of steel, and the mesh is made with ...
Synthetic polymers began replacing other chemical binders for soil stabilization in agriculture in the late 20th century. [1] Compared to traditional chemical binders, polymer soil additives can achieve the same amount of strengthening at much lower concentrations – for example, mixtures of 0.5-1% of various biopolymers have strength levels that match or exceed those of 10% cement mixtures ...
Unlike regular concrete, ECC has a tensile strain capacity in the range of 3–7%, [1] compared to 0.01% for ordinary portland cement (OPC) paste, mortar or concrete. ECC therefore acts more like a ductile metal material rather than a brittle glass material (as does OPC concrete), leading to a wide variety of applications.
Section of DICL pipe (ductile iron concrete lined), commonly used for utility water mains, showing iron casing, concrete lining, and textured polymer protective coatings on the inner and outer surfaces. Cement-mortar lined ductile iron pipe is a ductile iron pipe with cement lining on the inside surface, and is commonly used for water distribution.
In building construction, concrete uses cement as a binder. Asphalt pavement uses bitumen binder. Traditionally straw and natural fibres are used to strengthen clay in wattle-and-daub construction and in the building material cob which would otherwise become brittle after drying. Sand is added to improve compressive strength, hardness and ...
Their addition allows to decrease the water-to-cement ratio of concrete or mortar without negatively affecting the workability of the mixture. It enables the production of self-consolidating concrete and high-performance concrete. The water–cement ratio is the main factor determining the concrete strength and its durability. Superplasticizers ...
Bitumen mortar was also used at a lower-frequency, including in the Great Bath at Mohenjo-daro. [5] [6] In early Egyptian pyramids, which were constructed during the Old Kingdom (~2600–2500 BC), the limestone blocks were bound by a mortar of mud and clay, or clay and sand. [7] In later Egyptian pyramids, the mortar was made of gypsum, or lime ...
Polymer nomenclature is generally based upon the type of monomer residues comprising the polymer. A polymer which contains only a single type of repeat unit is known as a homopolymer, while a polymer containing two or more types of repeat units is known as a copolymer. [22] A terpolymer is a copolymer which contains three types of repeat units ...