Search results
Results from the WOW.Com Content Network
The source of the heat for the self-heated can is an exothermic reaction that the user initiates by pressing on the bottom of the can. The can is manufactured as a triple-walled container. A container for the beverage is surrounded by a container of the heating agent separated from a container of water by a thin breakable membrane.
A water dispenser, sometimes referred to as a water cooler (if used for cooling only), is a machine that dispenses and often also cools or heats up water with a refrigeration unit. It is commonly located near the restroom due to closer access to plumbing. A drain line is also provided from the water cooler into the sewer system.
The 340 and 375 kW (462 and 510 PS; 456 and 503 hp) versions were introduced in Mercedes-AMG GT (C190). The power has been upgraded several times. Brabus offers PowerXtra B40S-800, a performance upgrade kit for AMG GT. [12] The kit increases the output to 588 kW (799 PS; 789 hp) at 6,500 rpm and 1,000 N⋅m (738 lb⋅ft) at 1,750-4,500 rpm.
The disadvantage of the linear PTR is that the cold spot is in the middle of the cooler. For many applications it is preferable that the cooling is produced at the end of the cooler. By bending the PTR we get a U-shaped cooler. Both hot ends can be mounted on the flange of the vacuum chamber at room temperature. This is the most common shape of ...
Common absorption refrigerators use a refrigerant with a very low boiling point (less than −18 °C (0 °F)) just like compressor refrigerators.Compression refrigerators typically use an HCFC or HFC, while absorption refrigerators typically use ammonia or water and need at least a second fluid able to absorb the coolant, the absorbent, respectively water (for ammonia) or brine (for water).
Additional cooling can be provided by externally spraying a fine mist onto the intercooler surface, or even into the intake air itself, to further reduce intake charge temperature through evaporative cooling. Intercoolers can vary dramatically in size, shape and design, depending on the performance and space requirements of the system.
A pot-in-pot refrigerator, clay pot cooler [1] or zeer (Arabic: زير) is an evaporative cooling refrigeration device which does not use electricity. It uses a porous outer clay pot (lined with wet sand) containing an inner pot (which can be glazed to prevent penetration by the liquid) within which the food is placed.
They also serve the commercial and food service market with beverage centers, display freezers, ice makers [3] and other appliances that comply with NSF standards. They serve the medical market through AccuCold by Summit Appliance, where its line includes vaccine refrigeration, low temperature freezers, and general purpose refrigeration.