Search results
Results from the WOW.Com Content Network
The Bramah lock used a cylindrical key and keyhole, as does the current lock. The end of the key has a number of slots of different depths which, when inserted into the lock and pressed against spring tension, would depress a number of wafers to a specified depth and enable the key to turn and open the lock.
Higher security lever locks (such as the five-lever) usually have notches cut into the levers. These catch the locking bolt and prevent it from moving if picking is attempted (similar to the security pins in a pin tumbler lock). The Chubb detector lock is a variation of the lever lock which was designed to detect and prevent picking attempts.
When the correct key is inserted, it will clear the wards and rotate about the center post. The key may then strike a lever, activating a latch or sliding bolt, or it may itself push against the latch or bolt. In a double acting lever lock, the key may additionally push against a spring-loaded lever which holds the sliding bolt in place.
A Suffolk latch is a type of latch incorporating a simple thumb-actuated lever and commonly used to hold wooden gates and doors closed. Comparison of Suffolk and Norfolk latches. The Suffolk latch originated in the English county of Suffolk in the 16th century and stayed in common use until the 19th century. They have recently come back into ...
The closer on a manual lathe is either lever-style or handwheel-style. The closer on a CNC lathe is powered (electric, hydraulic, or pneumatic), and it may be controlled by various means: a foot pedal that the operator steps on when desired; a line in the program (for opening and closing under program control); or a button on the control panel.
swing bar lock. A door security restrictor, aka a door swing bar lock, is a newer device intended to replace door chains. It consists of a U-shaped bar that attaches to a hinge on the doorframe, and a knob on the door. The bar swings over the knob to restrict the full opening of the door.
As the lever (E) is moved forward the tumbler (G) revolves and one of its arms engages and draws back the spring until the tumbler is firmly locked in the notch (H) and the spring is held by the rest-piece (L) which is pushed into a bend in the lower part of the tumbler. After firing, the cartridge is partially extracted by the lock.
A mechanical lever frame inside the signal box at Knockcroghery in Ireland Waterloo station A signalbox, LSWR (Howden, Boys' Book of Locomotives, 1907). Mechanical railway signalling installations rely on lever frames for their operation to interlock the signals, track locks [1] and points to allow the safe operation of trains in the area the signals control.