Search results
Results from the WOW.Com Content Network
Taxiing (rarely spelled taxying) [1] is the movement of an aircraft on the ground, under its own power, in contrast to towing or pushback where the aircraft is moved by a tug. The aircraft usually moves on wheels, but the term also includes aircraft with skis or floats (for water-based travel).
Runway Holding Position Markings These show where an aircraft should stop when approaching a runway from a taxiway. They consist of four yellow lines, two solid and two dashed, spaced six or twelve inches (15 or 30 cm) apart, and extending across the width of the taxiway or runway.
It is a higher-risk procedure, as pilots may not see, or hear the radio transmissions from, aircraft taxiing on the runway. [3] At controlled airports, take-off or landing clearances do not authorize the pilot to reverse course and backtrack along the runway, unless specified by air traffic control.
Takeoff is the phase of flight in which an aircraft goes through a transition from moving along the ground to flying in the air, usually starting on a runway. For balloons, helicopters and some specialized fixed-wing aircraft (VTOL aircraft such as the Harrier), no runway is needed. Takeoff is the opposite of landing.
Intersecting Taxiway: before the intersection with a taxiway that will have other aircraft taxiing for takeoff or parking. Point on Runway: before a designated point. This is the newest type, used when safety precautions are needed due to hazards concerning other runways or taxiways, or hazards for a landing plane on its runway (ice, for instance).
Upon each landing, depending on the runway distance remaining, aircraft and pilot capabilities, noise abatement procedures in effect, and air traffic control clearance, the pilot will perform either a full stop landing (taxi to the runway beginning for subsequent take-off), a touch-and-go (stabilize in the landing roll, reconfigure the aircraft ...
Runway 13R at Palm Springs International Airport An MD-11 at one end of a runway. In aviation, a runway is an elongated, rectangular surface designed for the landing and takeoff of an aircraft. [1] Runways may be a human-made surface (often asphalt, concrete, or a mixture of both) or a natural surface (grass, dirt, gravel, ice, sand or salt).
The Obstacle Free Zone (OFZ) clearing standard precludes taxiing and parked airplanes and object penetrations, except for frangible navigation aid locations that are fixed by function. It is centered above the runway and the extended runway centerline and is intended to provide clearance protection for aircraft landing or taking off from the ...