Search results
Results from the WOW.Com Content Network
Oil conversion factor from m³ to bbl (or stb) is 6.28981100 Gas conversion factor from standard m³ to scf is 35.314666721 Note that the m³ gas conversion factor takes into account a difference in the standard temperature base for measurement of gas volumes in metric and imperial units.
The table of imperial avoirdupois mass is the same as the United States table up to one pound, but above that point, the tables differ. The imperial system has a hundredweight, defined as eight stone of 14 lb each, or 112 lb (50.802 345 44 kg), whereas a US hundredweight is 100 lb (45.359 237 kg). In both systems, 20 hundredweights make a ton.
Gives 1.1981 moles per scf or 0.002641 pound moles per scf. The standard cubic meter of gas (scm) is used in the context of the SI system. It is similarly defined as the quantity of gas contained in a cubic meter at a temperature of 15 °C (288.150 K; 59.000 °F) and a pressure of 101.325 kilopascals (1.0000 atm; 14.696 psi). [1]
Metric regions commonly use the tonne of oil equivalent (toe), or more often million toe (Mtoe). Since this is a measurement of mass, any conversion to barrels of oil equivalent depends on the density of the oil in question, as well as the energy content. Typically 1 tonne of oil has a volume of 1.08 to 1.19 cubic metres (6.8 to 7.5 bbl).
The World Bank estimates that over 150 billion cubic metres (5.3 × 10 ^ 12 cu ft) of natural gas are flared or vented annually, an amount worth approximately $30.6 billion, equivalent to 25% of the United States' gas consumption or 30% of the European Union's annual gas consumption, [13] a resource that could be useful using GTL. Gas-to ...
The volume of bulk goods is usually measured by filling a standard container, so the containers' names and the units' names are often the same, and indeed both are called "measures". Normally, a level or struck measure is assumed, with the excess being swept off level ("struck") with the measure's brim—the stick used for this is called a ...
For example, such a regulation might limit the concentration of NOx to 55 ppmv in a dry combustion exhaust gas corrected to 3 volume percent O 2. As another example, a regulation might limit the concentration of particulate matter to 0.1 grain per standard cubic foot (i.e., scf) of dry exhaust gas corrected to 12 volume percent CO 2.
One GGE of natural gas is 126.67 cubic feet (3.587 m 3) at standard conditions. This volume of natural gas has the same energy content as one US gallon of gasoline (based on lower heating values: 900 BTU/cu ft (9.3 kWh/m 3) of natural gas and 114,000 BTU/US gal (8.8 kWh/L) for gasoline). [22]