Search results
Results from the WOW.Com Content Network
Video random-access memory (VRAM) is dedicated computer memory used to store the pixels and other graphics data as a framebuffer to be rendered on a computer monitor. [1] It often uses a different technology than other computer memory, in order to be read quickly for display on a screen.
Video memory was shared with the first 128 KiB of RAM. The exact size of the video memory could be reconfigured by software to meet the needs of the current program. An early hybrid system was the Commodore Amiga which could run as a shared memory system, but would load executable code preferentially into non-shared "fast RAM" if it was available.
The TMS9918A's method of accessing the video RAM is slower than direct access, as used in unified-memory computers, because accessing video memory involved first outputting the low- then the hi-byte of the (14-bit) video memory address to I/O port $99, then one or more bytes of 8-bit data to port $98.
The controller can then continue to use the DRAM port for drawing objects on the display. Meanwhile, the controller feeds a clock called the shift clock (SCLK) to the VRAM's video port. Each SCLK pulse causes the VRAM to deliver the next data bit, in strict address order, from the shift register to the video port. For simplicity, the graphics ...
As an example, a 512 MB SDRAM DIMM (which contains 512 MB), might be made of eight or nine SDRAM chips, each containing 512 Mbit of storage, and each one contributing 8 bits to the DIMM's 64- or 72-bit width. A typical 512 Mbit SDRAM chip internally contains four independent 16 MB memory banks. Each bank is an array of 8,192 rows of 16,384 bits ...
Unlike every other IBM-designed PC video standard, TGA uses some of the main system RAM as video RAM. The PCjr had 64 KB of built-in RAM on the mainboard, and an additional 64 KB can be installed via a special card that plugs into a dedicated slot on the PCjr mainboard. [ 25 ]
Some of the address space may be shared between RAM, peripherals, and read-only memory. In the case of a microcontroller with no external RAM, the size of the RAM array is limited by the size of the integrated circuit die. In a packaged system, only enough RAM may be provided for the system's required functions, with no provision for addition ...
From CR3, the page table walker can access page directories and tables that are beyond the 32-bit range. Secondly, the physical address for the data being accessed (stored in the page table) can be represented as a physical address larger than the 32-bit addresses supported in a system without PAE.