Search results
Results from the WOW.Com Content Network
Deflection (f) in engineering. In structural engineering, deflection is the degree to which a part of a long structural element (such as beam) is deformed laterally (in the direction transverse to its longitudinal axis) under a load.
P-delta is a moment found by multiplying the force due to the weight of the structure and applied axial load, P, by the first-order deflection, Δ or δ. NUMERICAL EXAMPLE OF P DELTA EFFECT ON A CALCULATOR You have a 1 meter tall rigid vertical rod that rotates on a hinge at the bottom of the rod. There is a 1 newton load on the top of the rod.
Strength depends upon material properties. The strength of a material depends on its capacity to withstand axial stress, shear stress, bending, and torsion.The strength of a material is measured in force per unit area (newtons per square millimetre or N/mm², or the equivalent megapascals or MPa in the SI system and often pounds per square inch psi in the United States Customary Units system).
The curve () describes the deflection of the beam in the direction at some position (recall that the beam is modeled as a one-dimensional object). is a distributed load, in other words a force per unit length (analogous to pressure being a force per area); it may be a function of , , or other variables.
The Southwell plot is a graphical method of determining experimentally a structure's critical load, without needing to subject the structure to near-critical loads. [1] The technique can be used for nondestructive testing of any structural elements that may fail by buckling .
A column under a concentric axial load exhibiting the characteristic deformation of buckling The eccentricity of the axial force results in a bending moment acting on the beam element. The ratio of the effective length of a column to the least radius of gyration of its cross section is called the slenderness ratio (sometimes expressed with the ...
Tensile stress is the stress state caused by an applied load that tends to elongate the material along the axis of the applied load, in other words, the stress caused by pulling the material. The strength of structures of equal cross-sectional area loaded in tension is independent of shape of the cross-section.
Shear and Bending moment diagram for a simply supported beam with a concentrated load at mid-span. Shear force and bending moment diagrams are analytical tools used in conjunction with structural analysis to help perform structural design by determining the value of shear forces and bending moments at a given point of a structural element such as a beam.