Search results
Results from the WOW.Com Content Network
In 1968, the small-block Ford stroke was increased from 2.87 in (72.9 mm) to 3 in (76.2 mm), giving a total displacement of 4,942 cc (4.9 L; 301.6 cu in). The connecting rods were shortened to allow the use of the same pistons as the 289. The new 302 replaced the 289 early in the 1968 model year.
The LV7 is the multi-point fuel injection 1.4 L naturally-aspirated variant of the SGE, with a 74 mm × 81.3 mm (2.91 in × 3.20 in) bore and stroke for a total capacity of 1,399 cc (1.4 L). Compression ratio is 10.6:1 and the engine can run on regular unleaded grade gasoline.
Ford Motor Company used the Zetec name on a variety of inline four-cylinder automobile engines.It was coined to replace "Zeta" on a range of 1.6 L to 2.0 L multi-valve engines introduced in 1991 because Ford was threatened with legal action by Lancia who owned the Zeta trademark. [1]
The 153 cu in engine had a 3 + 7 ⁄ 8-inch (98 mm) bore and 3 + 1 ⁄ 4-inch (82.6 mm) stroke, with two overhead valves per cylinder actuated by pushrods and a 1-3-4-2 firing order. The Chevy II 's 194 cu in six-cylinder used a 3 + 9 ⁄ 16 -inch (90.5 mm) bore, which by 1964 was enlarged to match the 153 four-cylinder's resulting in a ...
In line with the IDI diesel, the Power Stroke was offered in three-quarter-ton and larger versions of the Ford F-Series and Econoline product ranges. The Power Stroke is an electronically controlled, direct injection engine with a 4.11 in × 4.18 in (104.4 mm × 106.2 mm) bore and stroke creating a displacement of 444 cu in (7.3 L).
Bore and stroke is 86 mm × 85 mm (3.39 in × 3.35 in). The AJ35 version introduced for the 2003 model year added variable valve timing of the intake camshafts and electronic throttle control. While the block, crankshaft, pistons, and connecting rods are all unique to this displacement, many other parts are shared with the AJ-V8 engines ...
The 3.7 L's additional displacement comes from an increase in bore diameter to 95.5 mm (3.76 in), stroke remains identical to the 3.5 L at 86.7 mm (3.41 in). Ford Power Products sells this engine as the CSG-637 for industrial uses starting in mid-2015, which replaced the 4.2L Essex and is manufactured under license by Engine Distributors Inc. [ 5 ]
The GM L3B engine is a turbocharged four-cylinder gasoline engine designed by General Motors. It is an undersquare aluminum DOHC inline-four displacing 2.7 liters (165 cid) and tuned for strong low-end torque.