Search results
Results from the WOW.Com Content Network
In a PC, the BIOS, pre-loaded in ROM on the motherboard, takes control immediately after the CPU is reset, including during power-up, when a hardware reset button is pressed, or when a critical software failure (a triple fault) causes the mainboard circuitry to automatically trigger a hardware reset. The BIOS tests the hardware and initializes ...
The reset vector for the Intel 8086 processor is at physical address FFFF0h (16 bytes below 1 MB). The value of the CS register at reset is FFFFh and the value of the IP register at reset is 0000h to form the segmented address FFFFh:0000h, which maps to physical address FFFF0h.
INT 10h is fairly slow, so many programs bypass this BIOS routine and access the display hardware directly. Setting the video mode, which is done infrequently, can be accomplished by using the BIOS, while drawing graphics on the screen in a game needs to be done quickly, so direct access to video RAM is more appropriate than making a BIOS call ...
This implies that after the hardware reset, the CPU will start execution at the physical address 0xFFFF0. In IBM PC compatible computers, This address maps to BIOS ROM. The memory word at 0xFFFF0 usually contains a JMP instruction that redirects the CPU to execute the initialization code of BIOS. This JMP instruction is absolutely the first ...
INT 13h is shorthand for BIOS interrupt call 13 hex, the 20th interrupt vector in an x86-based (IBM PC-descended) computer system.The BIOS typically sets up a real mode interrupt handler at this vector that provides sector-based hard disk and floppy disk read and write services using cylinder-head-sector (CHS) addressing.
Below is the full 8086/8088 instruction set of Intel (81 instructions total). [2] These instructions are also available in 32-bit mode, in which they operate on 32-bit registers (eax, ebx, etc.) and values instead of their 16-bit (ax, bx, etc.) counterparts.
On some systems, a computer user can trigger an NMI through hardware and software debugging interfaces and system reset buttons. Programmers typically use debugging NMIs to diagnose and fix faulty code. In such cases, an NMI can execute an interrupt handler that transfers control to a special monitor program. From this program, a developer can ...
In computing, BIOS (/ ˈ b aɪ ɒ s,-oʊ s /, BY-oss, -ohss; Basic Input/Output System, also known as the System BIOS, ROM BIOS, BIOS ROM or PC BIOS) is a type of firmware used to provide runtime services for operating systems and programs and to perform hardware initialization during the booting process (power-on startup). [1]