Search results
Results from the WOW.Com Content Network
The boot ROM is either placed on the same die as the CPU or is an external ROM chip. On modern systems, the boot ROM (whether integrated into CPU or external ROM chip) is usually use NOR flash which supports execute in place. The boot ROM will then initialize the hardware busses and peripherals needed to boot.
The first program loaded into RAM is called a first-stage boot loader, and the program it loads is called a second-stage boot loader. On many embedded CPUs, the CPU built-in boot ROM, sometimes called the zero-stage boot loader, [50] can find and load first-stage boot loaders.
The computer first executes a relatively small program stored in the boot ROM, which is read-only memory (ROM, and later EEPROM, NOR flash) along with some needed data, to initialize hardware devices such as CPU, motherboard, memory, storage and other I/O devices, to access the nonvolatile device (usually block device, e.g., NAND flash) or ...
A bootable device can be storage devices like floppy disk, CD-ROM, USB flash drive, a partition on a hard disk (where a hard disk stores multiple OS, e.g Windows and Fedora), a storage device on local network, etc. [7] A hard disk to boot Linux stores the Master Boot Record (MBR), which contains the first-stage/primary bootloader in order to be ...
A modern PC with a bus rate of around 1 GHz and a 32-bit bus might be 2000x or even 5000x faster, but might have many more gigabytes of memory. With boot times more of a concern now than in the 1980s, the 30- to 60-second memory test adds undesirable delay for a benefit of confidence that is not perceived to be worth that cost by most users.
An add-in card requires an option ROM if the card is not supported by the motherboard BIOS and the card needs to be initialized or made accessible through BIOS services before the operating system can be loaded (usually this means it is required in the boot process). An additional advantage of ROM on some early PC systems (notably including the ...
The original IBM Personal Computer ROMs hooked INT 18H (originally to invoke Cassette BASIC) and INT 19H, as these two interrupts were used for the boot process. INT 19h is called to initiate the boot process, and INT 18h was called to start Cassette BASIC from ROM when the boot process found that none of the possible boot devices was bootable.
Network booting, shortened netboot, is the process of booting a computer from a network rather than a local drive. This method of booting can be used by routers, diskless workstations and centrally managed computers (thin clients) such as public computers at libraries and schools.