Search results
Results from the WOW.Com Content Network
Toughened glass was invented in 1874 by Francois Barthelemy Alfred Royer de la Bastie. [1] Wire mesh glass was invented in 1892 by Frank Shuman. [2] [3] Laminated glass was invented in 1903 by the French chemist Édouard Bénédictus (1878–1930). [4] These three approaches can easily be combined, allowing for the creation of glass that is at ...
In automobiles, the laminated glass panel is around 6.5 mm (0.26 inches) thick, in comparison to airplane glass being three times as thick. [21] In airliners on the front and side cockpit windows, there is often three plies of 4 mm toughened glass with 2.6 mm thick PVB between them.
Tempered or toughened glass is a type of safety glass processed by controlled thermal or chemical treatments to increase its strength compared with normal glass. Tempering puts the outer surfaces into compression and the interior into tension .
Safety and security films are used where there is a potential for injury from broken glass (such as glass doors or overhead glazing). These films can be applied to toughened, annealed, or laminated glass. They are available in various thicknesses, from 100 micrometers (or 4 mils minimum 2 ply) through to 525 micrometers + (21 mils).
Tempered laminated glass is designed to shatter into small pieces, preventing possible injury. When both pieces of glass are broken it produces a "wet blanket" effect and it will fall out of its opening. Heat strengthened laminated glass is stronger than annealed, but not as strong as tempered. It is often used where security is a concern.
Glazing, which derives from the Middle English for 'glass', is a part of a wall or window, made of glass. [ 1 ] [ 2 ] Glazing also describes the work done by a professional " glazier ". Glazing is also less commonly used to describe the insertion of ophthalmic lenses into an eyeglass frame.
Laminated fabric are widely used in different fields of human activity, including medical and military. [2]: 148 Woven fabrics (organic and inorganic based) are usually laminated by different chemical polymers to give them useful properties like chemical resistance, dust, grease, photoluminescence (glowing and other light-effects e.g. in high-visibility clothing), tear strength, stiffness ...
Also unlike toughened glass, chemically strengthened glass may be cut after strengthening, but loses its added strength within approximately 20 mm of the cut. Similarly, when the surface of chemically strengthened glass is deeply scratched, this area loses its additional strength. Another negative of chemically strengthened glass is the added cost.