Search results
Results from the WOW.Com Content Network
Wireless LAN (WLAN) channels are frequently accessed using IEEE 802.11 protocols. The 802.11 standard provides several radio frequency bands for use in Wi-Fi communications, each divided into a multitude of channels numbered at 5 MHz spacing (except in the 45/60 GHz band, where they are 0.54/1.08/2.16 GHz apart) between the centre frequency of the channel.
Dynamic Frequency Selection (DFS) is a channel allocation scheme specified for wireless LANs, commonly known as Wi-Fi. It is designed to prevent electromagnetic interference by avoiding co-channel operation with systems that predated Wi-Fi, such as military radar , satellite communication , and weather radar , and also to provide on aggregate a ...
The FCC's U-NII regulations for 5 GHz wireless operation in the USA. RadioElectronics' article on Wi-Fi / WLAN Channels, Frequencies, Bands & Bandwidths; Air802's article with tables of data on FCC Rules and Regulations which specifies frequencies and channels. Government of India NATIONAL FREQUENCY ALLOCATION PLAN-2011
IEEE 802.11a-1999 or 802.11a was an amendment to the IEEE 802.11 wireless local network specifications that defined requirements for an orthogonal frequency-division multiplexing (OFDM) communication system. It was originally designed to support wireless communication in the unlicensed national information infrastructure (U-NII) bands (in the 5 ...
The name Wi-Fi is not short-form for 'Wireless Fidelity', [34] although the Wi-Fi Alliance did use the advertising slogan "The Standard for Wireless Fidelity" for a short time after the brand name was created, [31] [33] [35] and the Wi-Fi Alliance was also called the "Wireless Fidelity Alliance Inc." in some publications. [36]
FM channel 200, 87.9 MHz, overlaps TV 6. This is used only by K200AA.; TV 6 analog audio can be heard on FM 87.75 on most broadcast radio receivers as well as on a European TV tuned to channel E4A or channel IC, but at lower volume than wideband FM broadcast stations, because of the lower deviation.
IEEE 802.11n is an amendment to IEEE 802.11-2007 as amended by IEEE 802.11k-2008, IEEE 802.11r-2008, IEEE 802.11y-2008, and IEEE 802.11w-2009, and builds on previous 802.11 standards by adding a multiple-input multiple-output (MIMO) system and 40 MHz channels to the PHY (physical layer) and frame aggregation to the MAC layer.
802.11g is the third modulation standard for wireless LANs.It works in the 2.4 GHz band (like 802.11b) but operates at a maximum raw data rate of 54 Mbit/s.Using the CSMA/CA transmission scheme, 31.4 Mbit/s [9] is the maximum net throughput possible for packets of 1500 bytes in size and a 54 Mbit/s wireless rate (identical to 802.11a core, except for some additional legacy overhead for ...