Search results
Results from the WOW.Com Content Network
Activated sludge tank at Beckton sewage treatment plant, UK.The white bubbles are due to the diffused air aeration system. The activated sludge process is a type of biological wastewater treatment process for treating sewage or industrial wastewaters using aeration and a biological floc composed of bacteria and protozoa.
Aerobic digestion is a process in sewage treatment designed to reduce the volume of sewage sludge and make it suitable [1] for subsequent use. [2] More recently, technology has been developed that allows the treatment and reduction of other [3] organic waste, such as food, cardboard and horticultural waste. It is a bacterial process occurring ...
It has not been discovered as of yet, where 100% of the sludge is in granular form. Most aerobic granular sludge has 50% and the remaining composition is dense microorganism. Overall, wastewater treatment technology is new and it will be difficult to replace conventional activated sludge processes for the usage of wastewater treatment. [7]
Membrane bioreactors can be used to reduce the footprint of an activated sludge sewage treatment system by removing some of the liquid components of the mixed liquor. This leaves a concentrated waste product that is then treated using the activated sludge process.
Sewage sludge treatment is the process of removing contaminants from wastewater.Sewage sludge is produced from the treatment of wastewater in sewage treatment plants and consists of two basic forms — raw primary sludge and secondary sludge, also known as activated sludge in the case of the activated sludge process.
One type of system that combines secondary treatment and settlement is the cyclic activated sludge (CASSBR), or sequencing batch reactor (SBR). Typically, activated sludge is mixed with raw incoming sewage, and then mixed and aerated. The settled sludge is run off and re-aerated before a proportion is returned to the headworks.
The sludge age may be too low to enable nitrification. The typical control band for the concentration of MLSS is 2 to 4 g/L for conventional activated sludge, or up to 15 g/L for membrane bioreactors. One of the easiest control procedures for activated sludge systems is the Constant Mixed Liquor Suspended Solids method.
Proponents of aerobic granular sludge technology claim "it will play an important role as an innovative technology alternative to the present activated sludge process in industrial and municipal wastewater treatment in the near future" [1] and that it "can be readily established and profitably used in activated sludge plants". [2]