enow.com Web Search

Search results

1. Results from the WOW.Com Content Network

2. Tire code - Wikipedia

   en.wikipedia.org/wiki/Tire_code

   Prior to 1964, tires were all made to a 90% aspect ratio. Tire size was specified as the tire width in inches and the diameter in inches – for example, 6.50-15. [29] From 1965 to the early 1970s, tires were made to an 80% aspect ratio. Tire size was again specified by width in inches and diameter in inches.

3. Wheel sizing - Wikipedia

   en.wikipedia.org/wiki/Wheel_sizing

   Modern road tires have several measurements associated with their size as specified by tire codes like 225/70R14. The first number in the code (e.g., "225") represents the nominal tire width in millimeters. This is followed by the aspect ratio (e.g.,"70"), which is the height of the sidewall expressed as a percentage of the nominal tire width.

4. Formula One tyres - Wikipedia

   en.wikipedia.org/wiki/Formula_One_tyres

   As Formula One wheel rim diameter size will switch from 13 to 18 in (330 to 457 mm), the tyre diameter of 2022-spec Pirelli Formula One tyres will also be altered, from 670 to 720 mm (26.4 to 28.3 in), while the tread width of 2022-spec Pirelli Formula One tyres are expected to be unchanged.

5. European Tyre and Rim Technical Organisation - Wikipedia

   en.wikipedia.org/wiki/European_Tyre_and_Rim...

   ETRTO sizes apply to rims and tyres for vehicles of all types, including bicycles. The great advantage of ETRTO sizing is that it is unambiguous; previously, nominal dimensions were used which were interpreted in different ways by different countries and manufacturers - a problem for the end user.

6. ISO 5775 - Wikipedia

   en.wikipedia.org/wiki/ISO_5775

   The section height of a tire is usually identical to its section width (for tires less than 28 mm, 2.5 mm have to be added to the width to get the height). The overall diameter of the tire is then the rim diameter plus twice the tire's section height. The ISO 5775-1 standard also defines procedures for measuring tires and for calculating from ...

7. Plus sizing - Wikipedia

   en.wikipedia.org/wiki/Plus_sizing

   Plus sizing is the practice of replacing an automotive wheel with one of a larger diameter fitted with a new tire of lower aspect ratio so that the new tire has close to the same diameter and circumference as the original tire to minimize any changes in speedometer accuracy, torque and traction control, while reducing sidewall flex and (generally) increasing cornering ability.