Search results
Results from the WOW.Com Content Network
Table II-5-1-2 Aircraft approach categories do not change during day-to-day operation. To change an aircraft's category, an aircraft must be re-certified with a different maximum landing mass. [1]: II-5-1-3 Pilots may not use a lower category than the one certified, but may choose to use a higher category for higher speed approaches. [2]
A single-engined Cessna 150L's airspeed indicator indicating its V-speeds in knots. In aviation, V-speeds are standard terms used to define airspeeds important or useful to the operation of all aircraft. [1] These speeds are derived from data obtained by aircraft designers and manufacturers during flight testing for aircraft type-certification.
An approach plate for the ILS or LOC approach to runway 14L at Cologne Bonn Airport, Germany. Approach plates (or, more formally, instrument approach procedure charts) are the printed or digital charts of instrument approach procedures that pilots use to fly instrument approaches during instrument flight rules (IFR) operations.
The higher the speed of the aircraft, the easier it is to counteract the yawing moment using the aircraft's controls. [8] The minimum control speed is the airspeed below which the force the rudder or ailerons can apply to the aircraft is not large enough to counteract the asymmetrical thrust at a maximum power setting.
At a glance, the pilot can determine a recommended speed (V speeds) or if speed adjustments are needed. Single and multi-engine aircraft have common markings. For instance, the green arc indicates the normal operating range of the aircraft, from V S1 to V NO. The white arc indicates the flap operating range, V SO to V FE, used for approaches ...
Point in a direct approach where a 3º normal visual descent can be started to achieve a safe landing and stabilized approach to the RWY - VDP (in distance) = HAT (height over terrain) / 300 (HAT is the height of the MDA read in the approach chart of the AD) VDR VHF digital radio VFO Variable-frequency oscillator: VFR visual flight rules: VG
Fast aircraft, for example military jets, may enter the pattern with a run-and-break (in the US, overhead maneuver or overhead break). The aircraft flies at speed along the final leg, and makes a sharp, high-G turn above midfield to lose speed and arrive on the downwind leg at pattern altitude and in landing configuration.
Turn at constant speed Approach and landing Takeoff. The speed, height and trim angle of attack are different for each flight condition, in addition, the aircraft will be configured differently, e.g. at low speed flaps may be deployed and the undercarriage may be down.