Search results
Results from the WOW.Com Content Network
The five criteria for ECCS are to prevent peak fuel cladding temperature from exceeding 2200 °F (1204 °C), prevent more than 17% oxidation of the fuel cladding, prevent more than 1% of the maximum theoretical hydrogen generation due the zircalloy metal-water reaction, maintain a coolable geometry, and allow for long-term cooling.
A fuel element failure is a rupture in a nuclear reactor's fuel cladding that allows the nuclear fuel or fission products, either in the form of dissolved radioisotopes or hot particles, to enter the reactor coolant or storage water. [1] The de facto standard nuclear fuel is uranium dioxide or a mixed uranium/plutonium dioxide.
A boiling water reactor (BWR) is a type of nuclear reactor ... fuel rods' cladding is a ... by a calculation that proves that 99.9% of fuel rods in a ...
The fuel cladding is the first layer of protection around the nuclear fuel and is designed to protect the fuel from corrosion that would spread fuel material throughout the reactor coolant circuit. In most reactors it takes the form of a sealed metallic or ceramic layer.
Zirconium cladding rapidly reacts with water steam above 1,500 K (1,230 °C). [15] [16] Oxidation of zirconium by water is accompanied by release of hydrogen gas. This oxidation is accelerated at high temperatures, e.g. inside a reactor core if the fuel assemblies are no longer completely covered by liquid water and insufficiently cooled. [17]
The time required for the fuel to melt. After the water has boiled, then the time required for the fuel to reach its melting point will be dictated by the heat input due to decay of fission products, the heat capacity of the fuel and the melting point of the fuel. The time required for the molten fuel to breach the primary pressure boundary.
As a nuclear fuel bundle increases in burnup (time in reactor), the radiation begins changing not only the fuel pellets inside the cladding, but the cladding material itself. The zirconium chemically reacts to the water flowing around it as coolant, forming a protective oxide on the surface of the cladding.
A typical RPV. Russian Soviet era RBMK reactors have each fuel assembly enclosed in an individual 8 cm diameter pipe rather than having a pressure vessel. Whilst most power reactors do have a pressure vessel, they are generally classified by the type of coolant rather than by the configuration of the vessel used to contain the coolant.