Search results
Results from the WOW.Com Content Network
Gypsum waste such as gypsum blocks and plaster do not require the removal of paper, as they are not made with paper from the beginning. It is typical for the gypsum recyclers to accept up to 3 per cent of contamination from other materials. The professional recyclers are capable of handling gypsum waste with nails and screws, wall coverings etc.
Drywall (also called plasterboard, dry lining, [1] wallboard, sheet rock, gib board, gypsum board, buster board, turtles board, slap board, custard board, gypsum panel and gyprock) is a panel made of calcium sulfate dihydrate , with or without additives, typically extruded between thick sheets of facer and backer paper, used in the construction ...
Kitchen renovation spackling to cover holes and tape between sheetrock boards Drywall with joint compound applied.. Joint compound (also known as drywall compound, drywall mud, joint cement or mastic) is a white powder of primarily gypsum dust mixed with water to form a paste the consistency of cake frosting, which is spread onto drywall and sanded when dry to create a seamless base for paint ...
Gypsum is a soft sulfate mineral composed of calcium sulfate dihydrate, with the chemical formula CaSO 4 ·2H 2 O. [4] It is widely mined and is used as a fertilizer and as the main constituent in many forms of plaster, drywall and blackboard or sidewalk chalk.
This type of joint can be made with a V-shaped jointer or a trowel soon after the bricks are laid. Ornamental and highly visible, the joint conceals small irregularities and is highly attractive. Like the concave joint, the V-joint is water-resistant because its formation compacts the mortar and its shape directs water away from the seal.
Lath and plaster largely fell out of favour in the U.K. after the introduction of plasterboard in the 1930s. [2] In Canada and the United States, wood lath and plaster remained in use until the process was replaced by transitional methods followed by drywall (the North American term for plasterboard) in the mid-twentieth century. [citation needed]
A building joint is a junction where building elements meet without applying a static load from one element to another. When one or more of these vertical or horizontal elements that meet are required by the local building code to have a fire-resistance rating, the resulting opening that makes up the joint must be firestopped in order to restore the required compartmentalisation.
Due to a large surface area of long-grain to long-grain wood and glue surface coverage, this is a very strong joint. [10] Bridle joint: Also known as open tenon, open mortise and tenon, or tongue and fork joints, this joint is where the through mortise is open on one side and forms a fork shape. The mate has a through tenon or necked joint.