Search results
Results from the WOW.Com Content Network
In aviation, the rule of three or "3:1 rule of descent" is a rule of thumb that 3 nautical miles (5.6 km) of travel should be allowed for every 1,000 feet (300 m) of descent. [ 1 ] [ 2 ] For example, a descent from flight level 350 would require approximately 35x3=105 nautical miles.
Flight levels require defining altitudes based on a standard altimeter setting. All aircraft operating at flight levels set 1013 hPa or 29.92 inHg. On the descent when descending through the published transition level, the altimeter is set to the local surface pressure, to display the correct altitude above sea level.
Airplane gliding occurs when all the engines of an aircraft shut down, but the wings are still functional and can be used for a controlled descent. This is a very rare condition in multi-engine airliners, [1] though it is the obvious result when a single-engine airplane experiences engine failure.
In aeronautics, a descent is any time period during air travel where an aircraft decreases altitude, and is the opposite of an ascent or climb.. Descents are part of normal procedures, but also occur during emergencies, such as rapid or explosive decompression, forcing an emergency descent to below 3,000 m (10,000 ft) and preferably below 2,400 m (8,000 ft), respectively the maximum temporary ...
An aircraft is streamlined from nose to tail to reduce drag making it advantageous to keep the sideslip angle near zero, though an aircraft may be deliberately "sideslipped" to increase drag and descent rate during landing, to keep aircraft heading same as runway heading during cross-wind landings and during flight with asymmetric power. [1]
In aeronautics, the rate of climb (RoC) is an aircraft's vertical speed, that is the positive or negative rate of altitude change with respect to time. [1] In most ICAO member countries, even in otherwise metric countries, this is usually expressed in feet per minute (ft/min); elsewhere, it is commonly expressed in metres per second (m/s).
The top of descent is usually calculated by an on-board flight management system, and is designed to provide the most economical descent to approach altitude, or to meet some other objective (fastest descent, greatest range, etc.). The top of descent may be calculated manually as long as distance, air speed, and
A minimum off-route altitude (MORA) provides a quick way for an aircraft pilot to read the minimum altitude required for terrain and obstacle clearance. MORAs give at least 1,000 feet altitude clearance above terrain and obstacles such as radio masts, and 2,000 feet where the terrain and obstacles exceed 5,000 feet. [1]