Search results
Results from the WOW.Com Content Network
Socket 478 was intended to be the replacement for Socket 423, a Willamette-based processor socket which was on the market for only a short time. This was the last Intel desktop socket to use a pin grid array interface. All later Intel desktop sockets use a land grid array interface. Socket 478 was phased out with the launch of LGA 775 in 2004.
Support for up to four DIMMs of DDR4 or DDR3L memory per CPU socket. Xeon D-15xx (uniprocessor, SoC) Model number sSpec number Cores Frequency Turbo L2 cache L3
In Intel's Tick-Tock cycle, the 2007/2008 "Tick" was the shrink of the Core microarchitecture to 45 nanometers as CPUID model 23. In Core 2 processors, it is used with the code names Penryn (Socket P), Wolfdale (LGA 775) and Yorkfield (MCM, LGA 775), some of which are also sold as Celeron, Pentium and Xeon processors.
Support for up to 24 DIMMs of DDR3 memory per CPU socket. Xeon E7-28xx v2 (dual-processor) Model number sSpec number Cores Frequency Turbo L2 cache L3 cache TDP Socket
Intel Core 2 Duo T9600 CPU showing Socket P. The front-side bus (FSB) of CPUs that install in Socket P can run at 400, 533, 667, 800, or 1066 MT/s.By adapting the multiplier the frequency of the CPU can throttle up or down to save power, given that all Socket P CPUs support EIST, except for Celeron that do not support EIST.
Socket 1 Socket 2 Socket 3 0.6 – 1-micron 1 25 MHz – 50 MHz 8 KiB – 16 KiB N/A N/A Intel Pentium: N/A P5 P54C P54CTB P54CS 1993–1999 65 MHz – 250 MHz Socket 2 Socket 3 Socket 4 Socket 5 Socket 7: 350 nm – 800 nm Unknown 1 50 MHz – 66 MHz 16 KiB N/A N/A Intel Pentium MMX: N/A P55C Tillamook 1996–1999 120 MHz – 300 MHz Socket 7
To keep costs low on high-volume competitive products, the CPU core is usually bundled into a system-on-chip (SOC) integrated circuit. SOCs contain the processor core, cache and the processor's local data on-chip, along with clocking, timers, memory (SDRAM), peripheral (network, serial I/O), and bus (PCI, PCI-X, ROM/Flash bus, I2C) controllers.
It was the first mobile processor to be based on the Core microarchitecture, replacing the Enhanced Pentium M-based Yonah processor. Merom has the product code 80537, which is shared with Merom-2M and Merom-L that are very similar but have a smaller L2 cache. Merom-L has only one processor core and a different CPUID model.