Search results
Results from the WOW.Com Content Network
SPS/STD - 'Standard Pressure Setting' or just 'Standard' refers to the altimeter being set to the standard pressure of 1013.25 hPa. It is the setting that causes an altimeter to read the aircraft's flight level (FL). Flight levels are given in hundreds of feet (for example: FL100 = 10 000 ft). Atmospheric pressure changes over time and position.
An altimeter or an altitude meter is an instrument used to measure the altitude of an object above a fixed level. [1] The measurement of altitude is called altimetry , which is related to the term bathymetry , the measurement of depth under water.
The altimeter setting used is the ISA sea level pressure of 1013 hPa or (29.92 inHg). The actual surface pressure will vary from this at different locations and times. Therefore, by using a standard pressure setting, every aircraft has the same altimeter setting, and vertical clearance can be maintained during cruise flight. [1]
Altimeter setting is a term and quantity used in aviation. The regional or local air pressure at mean sea level is called the altimeter setting , and the pressure which will calibrate the altimeter to show the height above ground at a given QNH airfield .
When flying at a flight level, the altimeter is always set to standard pressure (29.92 inHg or 1013.25 hPa). On the flight deck, the definitive instrument for measuring altitude is the pressure altimeter, which is an aneroid barometer with a front face indicating distance (feet or metres) instead of atmospheric pressure.
The greater the altitude, the lower the pressure. When a barometer is supplied with a nonlinear calibration so as to indicate altitude, the instrument is a type of altimeter called a pressure altimeter or barometric altimeter. A pressure altimeter is the altimeter found in most aircraft, and skydivers use wrist-mounted versions for similar ...
The altimeter, which is usually a barometer calibrated in units of distance instead of atmospheric pressure, can therefore be set in such a way as to indicate the height of the aircraft above ground. This is done by communicating with the control tower of the airport (to get the current surface pressure) and setting the altimeter so as to read ...
It indicates altitude obtained when an altimeter is set to an agreed baseline pressure under certain circumstances in which the aircraft’s altimeter would be unable to give a useful altitude readout. Examples would be landing at a high altitude or near sea level under conditions of exceptionally high air pressure.