Search results
Results from the WOW.Com Content Network
Press the UP or DOWN ARROW key to select Toner Life. Press OK. 4. Press the UP or DOWN ARROW key to select which color toner you want to check. Press OK. - The LCD will display 10 boxes. When the toner cartridge is full the 10 boxes will be black. As the toner is used the number of black boxes will decrease. For example, if the remaining life ...
1. In your Printer list, go to the Description column and click a printer's model number to check its supply levels. 2. Your current supply levels appear on the right side of the page. These are the levels Brother Refresh uses to trigger your Auto-Fulfillment deliveries. Click here to display all models covered by this answer.
It typically only appears if generic, 3rd party, or refilled ink cartridges are being used. a. Remove and examine the affected ink cartridge(s). b. Open the ink cartridge cover. c. Press the lock release lever(s) to release the affected ink cartridge(s). d. Remove the affected ink cartridge(s) from the machine. e.
If the message "Ink Low" appears on the display after replacing the ink cartridges, use the steps below. 1. Remove the affected cartridge (s) a. Open the ink-cartridge cover. b. Press the lock release lever (s) to release the affected ink cartridge (s). c. Remove the affected ink cartridge (s) from the machine. d.
Click Print. Go to STEP 3. 2. Check the Print Density setting. This setting allows you to adjust the print density from light to dark and can be adjusted in the Windows printer driver. a. On the Advanced tab in the Printing Preferences window, click the Device Options button (the icon with the wrench). b.
d. Remove all ink cartridges and close the ink cover. e. Remove the power cord from the AC outlet. f. Wait 15 seconds and reconnect the power cord. g. Once the machine boots to the Ink Cartridge screen, open the ink cartridge cover and slowly and firmly insert each ink cartridge into its designated position in the machine until it clicks.
To check the remaining life of the drum unit on the printer LCD display: 1. Make sure that the front cover is closed and the power cord is plugged in. 2. Turn on the printer and wait until the printer is in the Ready state. 3. Press the OK button, the LCD display will show Machine Info.
1. Make sure the machine is powered on. The power switch is located on the right side of the machine. The machine should be in Ready mode with the green Ready LED on. 2. Press the GO button three times. The machine will print the current Printer Settings which lists the percentage of remaining toner cartridge life.
- If "Cannot Detect Ink Volume" go to: Cannot Detect Ink Volume. 2. Remove and examine the affected ink cartridge(s). a. Open the ink cartridge cover. b. Press the lock release lever(s) to release the affected ink cartridge(s). c. Remove the affected ink cartridge(s) from the machine. d.
Press OK. Go to step 9. 9. Study the print outs. - 1 to 10 nozzles missing typically falls within the acceptable range of quality, but you can still run a Normal Cleaning to remedy a small number of missing nozzles. - If more than 10 areas are missing, continue to step 10. 10. Begin a Print Head Cleaning. a.