Search results
Results from the WOW.Com Content Network
An ATX power supply provides a number of peripheral power connectors and (in modern systems) two connectors for the motherboard: an 8-pin (or 4+4-pin) auxiliary connector providing additional power to the CPU and a main 24-pin power supply connector, an extension of the original 20-pin version. 20-pin Molex 39-29-9202 at the motherboard. 20-pin ...
AMP Mate-n-Lok and Molex 8981 0.093-inch pin and socket power connectors Molex standard 0.093-inch pin and socket connectors Molex disk drive power connection system tool and connectors Molex Mini-Fit Jr. connector as used for ATX power supply. A Molex connector is a
A second connector that goes to the motherboard (in addition to the 24-pin ATX motherboard connector) to supply dedicated power for the processor. 4+4-pin For the purpose of backwards compatibility, some connectors designed for high-end motherboards and processors, more power is required, therefore EPS12V has an 8-pin connector.
The male PCB connector on the 3½-inch floppy drive is normally a polarized right-angle male header, which is a TE Connectivity / AMP 171826-4, [4] the straight model is AMP 171825-4. [ 5 ] The shape of the connector housing makes it very easy to determine the pin number allocations by visual inspection.
4.8–6.4 GT/s Sandy Bridge-E/EP and Ivy Bridge-E/EP both support 40 PCIe 3.0 lanes. Using the Xeon focused 2011 socket gives also 4 memory Channels. rPGA 988B/ Socket G2: 2011 Intel Core i7 Intel Core i5 Intel Core i3 (2000, 3000 series) Notebook rPGA: 988 1 2.5 GT/s, 4.8 GT/s Socket FM1: 2011 AMD Llano Processors: Desktop PGA: 905 1.27 5.2 GT/s
15-pin D female General input/output Black / 426C USB 1 USB Type A female Grey / 424C IEEE 1394 (FireWire) 6-pin FireWire 400 Burgundy / 235C Parallel port: 25-pin D female Teal or turquoise / 322C Serial port: 9-pin D male Video Blue / 661C Analog monitor 15-pin VGA female White: Digital monitor DVI female Yellow / 123C Video out: S-Video: 4 ...
The ATX specification requires that the power-good signal ("PWR_OK") go high no sooner than 100 ms after the power rails have stabilized, and remain high for 16 ms after loss of AC power, and fall (to less than 0.4 V) at least 1 ms before the power rails fall out of specification (to 95% of their nominal value).
#PS_ON pin is marked by number 16. PS-ON Signal is a pin on a 20-pin or 24-pin ATX-specified power connector used to turn a personal computer power supply unit on/off. The PS_ON pin is normally pulled high in an open-circuit, but will turn on the power supply when it is pulled low, by shorting it to the common signal (COM).