Search results
Results from the WOW.Com Content Network
This is the only first order source of mismatch in the three-transistor Wilson current mirror [8] Second, at high currents the current gain, β, of transistors decreases and the relation of collector current to base-emitter voltage deviates from = (). The severity of these effects depends on the collector voltage.
A current mirror is a circuit designed to copy a current through one active device by controlling the current in another active device of a circuit, keeping the output current constant regardless of loading. The current being "copied" can be, and sometimes is, a varying signal current.
Some models base the collector current correction factor on the collector–base voltage V CB (as described in base-width modulation) instead of the collector–emitter voltage V CE. [3] Using V CB may be more physically plausible, in agreement with the physical origin of the effect, which is a widening of the collector–base depletion layer ...
Another useful characteristic is the common-base current gain, α F. The common-base current gain is approximately the gain of current from emitter to collector in the forward-active region. This ratio usually has a value close to unity; between 0.980 and 0.998. It is less than unity due to recombination of charge carriers as they cross the ...
A Widlar current source is a modification of the basic two-transistor current mirror that incorporates an emitter degeneration resistor for only the output transistor, enabling the current source to generate low currents using only moderate resistor values.
A small change to the input current results in much larger change in the output current supplied to the output load. One aspect of buffer action is transformation of impedances. For example, the Thévenin resistance of a combination of a voltage follower driven by a voltage source with high Thévenin resistance is reduced to only the output ...
A load line diagram, illustrating an operating point in the transistor's active region.. Biasing is the setting of the DC operating point of an electronic component. For bipolar junction transistors (BJTs), the operating point is defined as the steady-state DC collector-emitter voltage and the collector current with no input signal applied.
The simple BJT current mirror (Fig. 2) has two main imperfections: first, the output current differs from the input one because of the two base currents that the transistors Q 1 and Q 2 "suck" from the input current; second, the output current varies when the output (load) voltage changes because of the Early effect. These are completely ...