Search results
Results from the WOW.Com Content Network
Retrieved from "https://en.wikipedia.org/w/index.php?title=Straight-through_cable&oldid=904926600"
Straight-through cables are used for most applications, but crossover cables are required in others. In a straight-through cable, pins on one end correspond exactly to the corresponding pins on the other end (pin 1 to pin 1, pin 2 to pin 2, etc.). Using the same wiring scheme at each end yields a straight-through cable (a given color wire ...
Most Ethernet cables are wired straight-through (pin 1 to pin 1, pin 2 to pin 2, and so on). In some instances, the crossover form (receive to transmit and transmit to receive) may still be required. A cable for Ethernet may be wired to either the T568A or T568B termination standard at both ends of the cable. Since these standards differ only ...
The cable between the computer and the keyboard is a coiled cord with an appearance very similar to a telephone handset cable. [11] The connector on the Amiga 1000 uses crossover wiring, similar to a telephone handset. The connector wiring on the Apple computers, however, requires a polarized straight-through pinout.
In addition to the absolute pass-through that uses incremental values (i.e., $2 cost shock causing $1 increase in price yields a 50% pass-through rate), some researchers use pass-through elasticity, where the ratio is calculated based on percentage change of price and cost (for example, with elasticity of 0.5, a 2% increase in cost yields a 1% increase in price).
A standard straight-through cable is used for this purpose where each pin of the connector on one end is connected to the corresponding pin on the other connector. One terminal may be connected directly to another without the use of a switch or hub, but in that case, the crossover must be done in the cabling.
The objective of economic cable sizing is to find the lowest overall total cost while maintaining safety standards. There are several approaches to this which are all based upon these fundamental principles. The following standards cover the economics sizing of cables: IEC 60287-3-2.Electric cables - Calculation of the current rating - Part 3-2 ...
A solid-core cable uses one solid wire per conductor and in a four-pair cable, there would be a total of eight solid wires. [18] Stranded cable uses multiple wires wrapped around each other in each conductor and in a four-pair with seven strands per conductor cable, there would be a total of 56 wires (2 per pair × 4 pairs × 7 strands).