Search results
Results from the WOW.Com Content Network
Channel spacing, also known as bandwidth [citation needed], is a term used in radio frequency planning. It describes the frequency difference between adjacent allocations in a frequency plan . Channels for mediumwave radio stations, for example are allocated in internationally agreed steps of 9 or 10 kHz : 10 kHz in ITU Region 2 (the Americas ...
An FM radio receiver's tuner spans a limited range of frequencies. A government agency (such as the Federal Communications Commission in the United States) may apportion the regionally available bandwidth to broadcast license holders so that their signals do not mutually interfere. In this context, bandwidth is also known as channel spacing.
The center frequencies of the FM channels are spaced in increments of 200 kHz. The frequency of 87.9 MHz, while technically part of TV channel 6 (82 to 88 MHz), is used by just two FM class-D stations in the United States. Portable radio tuners often tune down to 87.5 MHz, so that the same radios can be made and sold worldwide.
You are free: to share – to copy, distribute and transmit the work; to remix – to adapt the work; Under the following conditions: attribution – You must give appropriate credit, provide a link to the license, and indicate if changes were made.
TETRA uses different channel spacing compared to GSM systems. The standard is 25 kHz spacing and the center frequency of each channel may be offset in a number of fashions such as ±12.5 kHz or even ±6.25 kHz. This makes it more tricky to correlate the ARFCN strictly to a pair of frequencies, you need to know the specifics of the system.
Frequency deviation is used in FM radio to describe the difference between the minimum or maximum extent of a frequency modulated signal, and the nominal center or carrier frequency. The term is sometimes mistakenly used as synonymous with frequency drift , which is an unintended offset of an oscillator from its nominal frequency.
To minimise inter-channel interference, stations operating from the same or nearby transmitter sites tend to keep to at least a 500 kHz frequency separation even when closer frequency spacing is technically permitted. The ITU publishes Protection Ratio graphs, which give the minimum spacing between frequencies based on their relative strengths. [6]
Indonesia allows 40 channels from 476.425 MHz to 477.400 MHz at 25 kHz channel spacing. It is the same channel plan as the original 40 channel Australia/New Zealand UHF CB allocation. Indonesia also has a 60-channel VHF-FM service available from 142.050 MHz to 143.525 MHz (channels spaced every 25 kHz).