Search results
Results from the WOW.Com Content Network
Socket 478 was intended to be the replacement for Socket 423, a Willamette-based processor socket which was on the market for only a short time. This was the last Intel desktop socket to use a pin grid array interface. All later Intel desktop sockets use a land grid array interface. Socket 478 was phased out with the launch of LGA 775 in 2004.
Intel i945GC northbridge with Pentium Dual-Core microprocessor. This article provides a list of motherboard chipsets made by Intel, divided into three main categories: those that use the PCI bus for interconnection (the 4xx series), those that connect using specialized "hub links" (the 8xx series), and those that connect using PCI Express (the 9xx series).
VIA chipsets support CPUs from Intel, AMD (e.g. the Athlon 64) and VIA themselves (e.g. the VIA C3 or C7).They support CPUs as old as the i386 in the early 1990s. In the early 2000s, their chipsets began to offer on-chip graphics support from VIA's joint venture with S3 Graphics beginning in 2001; this support continued into the early 2010s, with the release of the VX11H in August 2012.
PCI Express 1 ×16 or 2 ×8 ports, single 32-bit 33 MHz PCI bus, DMI for ICH7 3200: Bigby-V 800 or 1066 or 1333 MT/s Two channels of ECC DDR2-667 or DDR2-800 PCI Express ×8 port, single 32-bit 33 MHz PCI bus, DMI for ICH9 ICH9 3210: Bigby-P PCI Express 1 ×16 or 2 ×8 ports, single 32-bit 33 MHz PCI bus, DMI for ICH9
Open Host Controller Interface (OHCI) [1] is an open standard.. Die shot of a VIA VT6307 Integrated Host Controller used for IEEE 1394A communication. When applied to an IEEE 1394 (also known as FireWire; i.LINK or Lynx) card, OHCI means that the card supports a standard interface to the PC and can be used by the OHCI IEEE 1394 drivers that come with all modern operating systems.
PCI Express Mini Card (also known as Mini PCI Express, Mini PCIe, Mini PCI-E, mPCIe, and PEM), based on PCI Express, is a replacement for the Mini PCI form factor. It is developed by the PCI-SIG . The host device supports both PCI Express and USB 2.0 connectivity, and each card may use either standard.
Originally developed by the Personal Computer Memory Card International Association (), the ExpressCard standard is maintained by the USB Implementers Forum ().The host device supports PCI Express, USB 2.0 (including Hi-Speed), and USB 3.0 (SuperSpeed) [2] (ExpressCard 2.0 only) connectivity through the ExpressCard slot; cards can be designed to use any of these modes.
The most commonly used pin outs are Type 6 and Type 10. The latest pin-out added in revision 3.0 of the COM Express specification (available from www.picmg.org) is Type 7. The Type 7 provides up to four 10 GbE interfaces and up to 32 PCIe lanes, making COM Express 3.0 appropriate for data center, server, and high-bandwidth video applications.