Search results
Results from the WOW.Com Content Network
The camber is a measure of lateral main deck curvature in naval architecture. The curve is applied to a deck transversely, measured as the height of deck at centreline above the height of deck at side. The practice of adding camber to a ship's deck originated in the era of small sailing ships.
The reciprocating motion of a non-offset piston connected to a rotating crank through a connecting rod (as would be found in internal combustion engines) can be expressed by equations of motion. This article shows how these equations of motion can be derived using calculus as functions of angle ( angle domain ) and of time ( time domain ) .
Cube – The cargo carrying capacity of a ship, measured in cubic metres or feet. There are two common types: Bale Cube (or Bale Capacity) – The space available for cargo measured in cubic metres or feet to the inside of the cargo battens, on the frames, and to the underside of the beams. It is a measurement of capacity for cargo in bales or ...
The metacentric height (GM) is a measurement of the initial static stability of a floating body. [1] It is calculated as the distance between the centre of gravity of a ship and its metacentre . A larger metacentric height implies greater initial stability against overturning.
The most common and noted type of containers are the 20 feet and 40 feet containers. There are also containers with an extent in height called "High Cube" containers. [3] [9] The fixed exterior dimension of the standard size boxes are: [9] [10] 20 feet container size is: 20 ft (6.1 m) length by 8 ft (2.4 m) width by 8.6 ft (2.6 m) height.
In sailing and boating, a vessel's freeboard is the distance from the waterline to the upper deck level, measured at the lowest point of sheer where water can enter the boat or ship. [1] In commercial vessels, the latter criterion measured relative to the ship's load line , regardless of deck arrangements, is the mandated and regulated meaning.
Graphical representation of the dimensions used to describe a ship. Dimension "b" is the beam at waterline.. The beam of a ship is its width at its widest point. The maximum beam (B MAX) is the distance between planes passing through the outer sides of the ship, beam of the hull (B H) only includes permanently fixed parts of the hull, and beam at waterline (B WL) is the maximum width where the ...
Shipboard stability computer programs can be used to calculate a vessel's displacement. The process of determining a vessel's displacement begins with measuring its draft. [3] This is accomplished by means of its "draft marks". A merchant vessel has three matching sets: one mark each on the port and starboard sides forward, midships, and astern ...