Search results
Results from the WOW.Com Content Network
In effect, the formula reduces the legal weight limit for shorter trucks with fewer axles (see table below). For example, a 25-foot (7.6 m) three-axle dump truck would have a gross weight limit of 54,500 pounds (24,700 kg), instead of 80,000 pounds (36,000 kg), which is the standard weight limit for 63-foot (19.2 m) five-axle tractor-trailer. [1]
Overlength limits vary depending on the type and the configuration of vehicle, but the overall maximum forward distance (i.e. the length from the front of the vehicle to the centre axis of the rear axle set) is 9.5 m (31 ft 2 in), the overall maximum single vehicle length is 12.6 m (41 ft 4 in) (some buses can be longer), and the overall ...
The standard rail weight for British railways is now 113 lb/yd (56.1 kg/m). Before the 1990s, most diesel locomotives were built to a maximum axle load of 19 long tons (19.3 tonnes; 21.3 short tons) so the maximum locomotive weight was 76 long tons (77.2 tonnes; 85.1 short tons) for a four-axle locomotive and 114 long tons (115.8 tonnes; 127.7 short tons) for a six-axle one.
The federal gross weight limit for a Class 8 truck is 80,000 pounds (36,000 kg) (combined weight of truck, trailer, and cargo) with axle weights limited to 12,000 pounds (5,400 kg) (steering axle) and 34,000 pounds (15,000 kg) (tandem axles).
Vehicle size classes are series of ratings assigned to different segments of automotive vehicles for the purposes of vehicle emissions control and fuel economy calculation. . Various methods are used to classify vehicles; in North America, passenger vehicles are classified by total interior capacity while trucks are classified by gross vehicle weight rating (GV
Gross axle weight rating: lb/axle lb/axle kg/axle durability, economics lower is better for road and vehicle performance and taxation; larger is usually better for large goods vehicles carrying loads Ultimately limited by the hardness of the road surface and legal limits intended to limit damage to it
Class C removes the GVWR limit of Class C1, but the GTWR limit for the trailer of 750 kg remains. (This often referred to as a "Rigid Heavy Goods Vehicle" or "Rigid truck" licence) Class C1E allows for a class B or C1 vehicle and a trailer of more than 750 kg GTWR, so long as the combined gross weight does not exceed 12 000 kg.
Weigh-in-motion or weighing-in-motion (WIM) devices are designed to capture and record the axle weights and gross vehicle weights as vehicles drive over a measurement site. . Unlike static scales, WIM systems are capable of measuring vehicles traveling at a reduced or normal traffic speed and do not require the vehicle to come to a st