Search results
Results from the WOW.Com Content Network
A 5% displayed LFL reading for methane, for example, would be equivalent to 5% multiplied by 4.4%, or approximately 0.22% methane by volume at 20 degrees C. Control of the explosion hazard is usually achieved by sufficient natural or mechanical ventilation, to limit the concentration of flammable gases or vapors to a maximum level of 25% of ...
Process Safety Management of Highly Hazardous Chemicals is a regulation promulgated by the U.S. Occupational Safety and Health Administration (OSHA). [1] It defines and regulates a process safety management (PSM) program for plants using, storing, manufacturing, handling or carrying out on-site movement of hazardous materials above defined amount thresholds.
Division 4.1: Flammable Solid . Flammable solids are any of the following four types of materials: Desensitized Explosives: explosives that, when dry, are Explosives of Class 1 other than those of compatibility group A, which are wetted with sufficient water, alcohol, or plasticizer to suppress explosive properties; and are specifically authorized by name either in the 49CFR 172.101 Table or ...
The process of assessment of oxygen compatibility would generally include the following stages: [1] Identification of worst-case operating conditions. Evaluation of flammability of system materials. Geometry should be considered as most materials are more flammable when they have small cross-sections or are finely divided.
The quantity of vapour produced can be enhanced by increasing the surface area of the material forming a mist or dust. Take wood as an example. Finely divided wood dust can undergo explosive flames and produce a blast wave. A piece of paper (made from wood) catches on fire quite easily. A heavy oak desk is much harder to ignite, even though the ...
Class 3: Flammable Liquids A flammable liquid is a liquid having a flash point of not more than 60 °C (140 °F), or any material in a liquid phase with a flash point at or above 37.8 °C (100 °F) that is intentionally heated and offered for transportation or transported at or above its flash point in a bulk packaging. The following exceptions ...
An oxidizer is a material that may, generally by yielding oxygen, cause or enhance the combustion of other materials. A solid material is classed as a Division 5.1 material if, when tested in accordance with the UN Manual of Tests and Criteria, its mean burning time is less than or equal to the burning time of a 3:7 potassium bromate /cellulose ...
Under the UN Dangerous Goods classification, explosive hazard Divisions are awarded using the UN Manual of Criteria and Tests, by following the process flow chart '10.3 Procedure for assignment to a division of the class of explosives' and conducting the appropriate tests either UN series 5, series 6, or series 7 tests. [3]