Search results
Results from the WOW.Com Content Network
In between the posts, two 2x4s are attached to the posts with screws for the best connection. The lower board is placed 3.5" from the top of the finish deck to the bottom of the board. The top board is placed with the top at 35" from the deck. Then the vertical 2x2 pressure treated wood balusters are installed spaced regularly every 3.5". Then ...
Sidewalks are a common form of hardscaping. Hardscape is hard landscape materials in the built environment structures that are incorporated into a landscape. [1] This can include paved areas, driveways, retaining walls, sleeper walls, stairs, walkways, and any other landscaping made up of hard wearing materials such as wood, stone, and concrete, as opposed to softscape, the horticultural ...
Stoop, "a small porch", comes from Dutch stoep [1] (meaning: step/sidewalk, pronounced the same as English "stoop"); the word is now in general use in the Northeastern United States and is probably [original research?] spreading.
Permeable pavement surfaces may be composed of; pervious concrete, porous asphalt, paving stones, or interlocking pavers. [1] Unlike traditional impervious paving materials such as concrete and asphalt, permeable paving systems allow stormwater to percolate and infiltrate through the pavement and into the aggregate layers and/or soil below. In ...
A deck is also the surface used to construct a boardwalk over sand on barrier islands. Laying deck or throwing deck refers to the act of placing and bolting down cold-formed steel beneath roofing and concrete floors. This is usually done by an ironworker, sometimes in conjunction with a cement mason or carpenter. It regarded as one of the most ...
Scaled chart showing steps measured in inches. The tallest single step measures approximately 20 inches (51 cm) (located adjacent to the only intermediate landing without a curved bench for resting). The average step height is 10.5 inches (27 cm), and the shortest is 3.5 inches (8.9 cm).
A portico is a porch leading to the entrance of a building, or extended as a colonnade, with a roof structure over a walkway, supported by columns or enclosed by walls. This idea was widely used in ancient Greece and has influenced many cultures, including most Western cultures. Porticos are sometimes topped with pediments.
The chronological steps that need to be taken for a tilt-up project are: site evaluation, engineering, footings and floor slabs, forming tilt-up panels, steel placement, embeds and inserts, concrete placement, panel erection and panel finishing. [1] [6] Once the pad (casting surface or floor slab) has cured, forms are built on top. Dimensional ...