Search results
Results from the WOW.Com Content Network
Fuel tanks of a capacity greater than 25 US gallons must adhere to specifications for spillage, leakage, mounting, impact survivability, weld requirements, venting and a host of other stipulations. The regulations require side-mounted fuel tanks to survive a 30-foot drop test, while non-side-mounted fuel tanks must survive a 10-foot drop test.
Standard fuel bladder tanks sizes range from 100-US-gallon (380 L) to 200,000-US-gallon (760,000 L) capacities and larger. Custom fuel storage bladders and cells are available, although at sizes exceeding 50,000 US gallons (190,000 L) there is an increased spill risk.
The average fuel tank capacity for cars is 50–60 L (12–16 US gal). [3] The most common materials for fuel tanks are metal or plastic. Metal (steel or aluminium) fuel tanks are usually built by welding stamped sheetmetal parts together. Plastic fuel tanks usually built using blow molding, which allows more complex shapes to be used.
The fuel pump used in these engines was the Bosch P7100 injection pump, this pump is driven off the camshaft gear and drives its own internal camshaft to inject fuel to the individual injectors. [13] This pump itself was one of the most popular options for fueling for the B-Series Engines because of this simplistic design and how reliable it was.
The fuel tank holds 10 U.S. gallons (38 L; 8.3 imp gal) and the fresh water tank has a capacity of 10 U.S. gallons (38 L; 8.3 imp gal). [1] The wing keel version of the boat has a PHRF racing average handicap of 192 with a high of 186 and low of 201. It has a hull speed of 6.36 kn (11.78 km/h). [2]
It has a 4.125-inch (104.8 mm) bore and a 3.750-inch (95.25 mm) stroke. The 400 differed from other small-blocks in that the cylinders were siamesed and therefore required 'steam' holes in the block, head gaskets , and heads to help alleviate 'hot-spots' in the cooling system at the point above the siamesed cylinders.
A tank truck for a milk delivery parked in front of the Satamaito dairy in Pori, Finland. Tank trucks are described by their size or volume capacity. Large trucks typically have capacities ranging from 21,000 to 44,000 litres (5,500 to 11,600 US gal; 4,600 to 9,700 imp gal).
The inline six-cylinder 71 series engine was introduced as the initial flagship product of the Detroit Diesel Engine Division of General Motors in 1938.. This engine was in high demand during WWII, necessitating a dramatic increase in output: about 57,000 6-71s were used on American landing craft, including 19,000 on LCVPs, about 8,000 on LCM Mk 3, and about 9,000 in quads on LCIs; and 39,000 ...