Search results
Results from the WOW.Com Content Network
Oil and gas separators can have three general configurations: vertical, horizontal, and spherical.Vertical separators can vary in size from 10 or 12 inches in diameter and 4 to 5 feet seam to seam (S to S) up to 10 or 12 feet in diameter and 15 to 25 feet S to S. Horizontal separators may vary in size from 10 or 12 inches in diameter and 4 to 5 feet S to S up to 15 to 16 feet in diameter and ...
Grease trap for greywater in Lima, Peru. A grease trap (also known as grease interceptor, grease recovery device, grease capsule and grease converter) is a plumbing device (a type of trap) designed to intercept most greases and solids before they enter a wastewater disposal system.
A typical gravimetric API separator. An API oil–water separator is a device designed to separate gross amounts of oil and suspended solids from industrial wastewater produced at oil refineries, petrochemical plants, chemical plants, natural gas processing plants and other industrial oily water sources.
In a centrifugal oil and water separator, the force of gravity is one-thousand [citation needed] times greater that of the coalescing plate pack separator or the petrol interceptor, so the separation is much greater. Not only is the force of separation greater, but there are fewer working parts so maintenance is much easier and cheaper.
Oil water separators can be designed to treat a variety of contaminants in water including free floating oil, emulsified oil, dissolved oil and suspended solids. Not all oil separator types are capable of separating all contaminants. The most common performance parameters considered are: Oil droplet size (in the feed to the separator) Oil density
Bitumen froth treatment is a process used in the Athabasca oil sands (AOS) bitumen recovery operations to remove fine inorganics—water and mineral particles—from bitumen froth, by diluting the bitumen with a light hydrocarbon solvent—either naphthenic or paraffinic—to reduce the viscosity of the froth and to remove contaminants that were not removed in previous water-based gravity ...
The effective removal of oils and grease is dependent on the characteristics of the oil in terms of its suspension state and droplet size, which will in turn affect the choice of separator technology. Oil in industrial waste water may be free light oil, heavy oil, which tends to sink, and emulsified oil, often referred to as soluble oil.
In addition to oil, the output of a well blowout might include natural gas, water, drilling fluid, mud, sand, rocks, and other substances. Blowouts will often be ignited from sparks from rocks being ejected, or simply from heat generated by friction.