Ad
related to: reloading brass
Search results
Results from the WOW.Com Content Network
Components of a modern bottleneck rifle cartridge. Top-to-bottom: Copper-jacketed bullet, smokeless powder granules, rimless brass case, Boxer primer.. Handloading, or reloading, is the practice of making firearm cartridges by manually assembling the individual components (metallic/polymer case, primer, propellant and projectile), rather than purchasing mass-assembled, factory-loaded ...
The brass cases were required to have a length between 38.36 and 38.7 mm, so the cartridge was designated the "7.62×38mm". It was loaded with kugelpulver [Dutch / German > "Ball powder"] and used non-corrosive Sinoxid primers. The headstamp bore the metric designation (7.62×38mm) at 12 o'clock, the 2-digit year at 4 o'clock, and the ...
Redding Reloading, according to their catalog, offers custom made 3-die sets for the .400 Corbon. [23] Lubricating of the bottleneck case can be avoided when starting with .400 Corbon cases by using a carbide .45 ACP sizing die before using the .400 Corbon sizing die. Using a five-stage progressive reloading press makes this less of a chore.
The head of a brass case can be work-hardened to withstand the high pressures, and allow for manipulation via extraction and ejection without rupturing. The neck and body portion of a brass case is easily annealed to make the case ductile enough to allow reshaping so that it can be handloaded many times, and fire forming can help accurize the ...
Generally, only new, unfired .223 Remington brass is used for handloading TCU cartridges to avoid the premature case neck splits that can occur when resizing previously-fired .223 Remington brass with TCU reloading dies. Done this way, TCU sized brass generally becomes as reliable for multiple reloadings as any other handgun cartridge case.
8×56mmR Mannlicher brass for handloading is produced by Prvi Partizan, although availability is irregular. Chargers or clips for the M.95 (and earlier 8×50mmR and 8×56mmR Mannlicher rifles) are available from surplus arms and ammunition dealers such as Sarco. Reloading dies are made by Hornady, RCBS, Redding, and Lee.
Early .577 Snider cartridges were made from a composite design using paper and brass foil with a stamped metallic base and primer, much like the first generation of Martini-Henry cartridges. Later cartridges (after the design had been proved with the Martini-Henry cartridges) were made from drawn brass, much like modern small arms ammunition.
The last brass case length was 1.050 to 1.100" long and was created exclusively for hand loaders so that both heel-base and hollow-base bullets could be used interchangeably (note that cartridges made from the longest brass cases and heel-base bullets are too long to fit most .41 Long Colt revolvers).
Ad
related to: reloading brass