Ad
related to: liquid ammonia pump system
Search results
Results from the WOW.Com Content Network
The PM consists of a single pump, a fixed charge accumulator, a Pump & Control Valve Package (PCVP) containing a firmware controller, startup heaters, isolation valves, and various sensors for monitoring performance. The Nitrogen Tank Assembly (NTA) controls the flow of ammonia out of the Ammonia Tank Assembly (ATA).
The first gas absorption refrigeration system using gaseous ammonia dissolved in water (referred to as "aqua ammonia") was developed by Ferdinand Carré of France in 1859 and patented in 1860. Carl von Linde, an engineering professor at the Technological University Munich in Germany, patented an improved method of liquefying gases in 1876.
The ammonia/water heat pumps are essentially limited to residential applications because they are only commercially limited to small sizes (a few KW). [3] [11] If the system absorbs heat from the residential building, it works as a refrigeration machine; if it releases heat to the interior of a residential building, it heats the house. [12]
Common absorption refrigerators use a refrigerant with a very low boiling point (less than −18 °C (0 °F)) just like compressor refrigerators.Compression refrigerators typically use an HCFC or HFC, while absorption refrigerators typically use ammonia or water and need at least a second fluid able to absorb the coolant, the absorbent, respectively water (for ammonia) or brine (for water).
The heat pump uses the natural refrigerant ammonia that has a zero global warming potential and is not a greenhouse gas. The heat source is seawater that is taken in around 8 or 9 °C from a depth of 18 m and is cooled by low pressure liquid refrigerant. Using a vapor-compression refrigeration cycle, the system heats district water from 65 °C ...
Thermodynamic heat pump cycles or refrigeration cycles are the conceptual and mathematical models for heat pump, air conditioning and refrigeration systems. [1] A heat pump is a mechanical system that transmits heat from one location (the "source") at a certain temperature to another location (the "sink" or "heat sink") at a higher temperature. [2]
The main difference with absorption cycle, is that in adsorption cycle, the refrigerant (adsorbate) could be ammonia, water, methanol, etc., while the adsorbent is a solid, such as silica gel, activated carbon, or zeolite, unlike in the absorption cycle where absorbent is liquid.
The specific volume of the liquid at the condenser pressure should be as small as possible in order to minimise the required feedwater pump work. Non-corrosivity and compatibility with common system materials are important selection criteria. The fluid should be chemically stable over the whole temperature and pressure range employed.
Ad
related to: liquid ammonia pump system