Search results
Results from the WOW.Com Content Network
Nitrogen gas is an industrial gas produced by the fractional distillation of liquid air, or by mechanical means using gaseous air (pressurised reverse osmosis membrane or pressure swing adsorption). Nitrogen gas generators using membranes or pressure swing adsorption (PSA) are typically more cost and energy efficient than bulk-delivered ...
Flammability diagram for methane. Flammability diagrams show the control of flammability in mixtures of fuel, oxygen and an inert gas, typically nitrogen.Mixtures of the three gasses are usually depicted in a triangular diagram, known as a ternary plot.
Division 2.1: Flammable, Non-Toxic Gas Flammable gas means any material that: Is ignitable at 101.3 kPA (14.7 psia) when in a mixture of 13 percent or less by volume with air; or; Has a flammable range at 101.3 kPa with air of at least 12 percent regardless of the lower limit.
Isobutylene see also Petroleum gases, liquefied: UN 1056: 2.2: Krypton, compressed UN 1057: 2.1: Lighters containing flammable gas 2.1: Lighter refills containing flammable gas not exceeding 4 fluid ounces (7.22 cubic inches) and 65 grams of flammable gas UN 1058: 2.2: Liquified gases, nonflammable charged with nitrogen, carbon dioxide, or air ...
Controlling gas and vapor concentrations outside the flammable limits is a major consideration in occupational safety and health. Methods used to control the concentration of a potentially explosive gas or vapor include use of sweep gas, an unreactive gas such as nitrogen or argon to dilute the explosive gas before coming in contact with air.
The purge gas is inert, i.e. by definition [1] non-combustible, or more precisely, non-reactive. The most common purge gases commercially available in large quantities are nitrogen and carbon dioxide. Other inert gases, e.g. argon or helium may be used. Nitrogen and carbon dioxide are unsuitable purge gases in some applications, as these gases ...
The gaseous state of water is lighter than air (density 0.804 g/L at STP, average molecular mass 18.015 g/mol) due to water's low molar mass when compared with typical atmospheric gases such as nitrogen gas (N 2). It is non-flammable and much cheaper than helium. The concept of using steam for lifting is therefore already 200 years old.
The term inert gas is context-dependent because several of the inert gases, including nitrogen and carbon dioxide, can be made to react under certain conditions. [1] [2] Purified argon gas is the most commonly used inert gas due to its high natural abundance (78.3% N 2, 1% Ar in air) [3] and low relative cost.