Search results
Results from the WOW.Com Content Network
For older shotguns having only one fixed choke, intended primarily for equally likely use against rabbits, squirrels, quail, doves, and pheasant, an often-chosen choke is the improved cylinder, in a 28 inches (710 mm) barrel, making the shotgun suitable for use as a general all-round hunting shotgun, without having excess weight.
The diameter of the wad slug is slightly less than the nominal bore diameter, being around 0.690 in (17.5 mm) for a 12-gauge wad slug, and a wad slug is generally cast solely from pure lead, necessary for increasing safety if the slug is ever fired through a choked shotgun.
American Derringer and Winchester market ammunition loaded with five 000 buckshot pellets in 3-inch (76 mm) shells and three pellets in 2.5-inch (64 mm) shells. [ 6 ] [ 7 ] Combination shells such as Winchester Supreme Elite .410 shells are loaded with three 71 grain disks and twelve BB pellets.
A choke is designed to alter or shape the distribution of the shot as it leaves the firearm. For shooting most game birds and clay pigeons, a desirable pattern is one that is as large as possible while being dense enough to ensure multiple hits on the target, at a particular range. The choke should be tailored to the range and size of the targets.
The cylindrical section is shorter, usually 0.6 to 0.75 inches (15 to 19 millimetres). The use of interchangeable chokes has made it easy to tune the performance of a given combination of shotgun and shotshell to achieve the desired performance. The choke should be tailored to the range and size of the targets.
A slug is a term used for a bulky solid ballistic projectile. It is "solid" in the sense of being composed of one piece; the shape can vary widely, including partially hollowed shapes. It is "solid" in the sense of being composed of one piece; the shape can vary widely, including partially hollowed shapes.
The degree of deformation is most acute with fuller chokes, which were among the most widely used in stock shotguns up until the 1980s and 1990s. Early shotgun slugs were "rifled" with deformable fins cast into the outside of the soft lead slug, which allowed the slug to swage down to fit the choke. With an open choke, the reduction in diameter ...
The size of the lead shot that is produced is determined by the diameter of the orifice used to drip the lead, ranging from approximately 0.018 inches (0.46 mm) for #9 lead shot to about 0.025 inches (0.64 mm) for #6 or #7.0 shot, while also depending on the specific lead alloy that is used.