Search results
Results from the WOW.Com Content Network
F6 disk is a colloquial name for a floppy disk containing a device driver that enables Windows Setup to install Microsoft Windows on storage devices based on SCSI, SATA, or RAID technologies. All versions of the Windows NT family prior to Windows Vista required F6 disks.
Diagram of an Intel RST setup. Intel Rapid Storage Technology (RST) is a driver SATA AHCI and a firmware-based RAID solution built into a wide range of Intel chipsets. Currently also is installed as a driver for Intel Optane temporary storage units. It contains two operation modes that follow two Intel specific modes rather than the SATA ...
In computer data storage, Smart Response Technology (SRT, also called SSD Caching before it was launched) is a proprietary caching mechanism introduced in 2011 by Intel for their Z68 chipset (for the Sandy Bridge–series processors), which allows a SATA solid-state drive (SSD) to function as cache for a (conventional, magnetic) hard disk drive (HDD).
Intel i945GC northbridge with Pentium Dual-Core microprocessor. This article provides a list of motherboard chipsets made by Intel, divided into three main categories: those that use the PCI bus for interconnection (the 4xx series), those that connect using specialized "hub links" (the 8xx series), and those that connect using PCI Express (the 9xx series).
Eight-bit computers running CP/M 80 were built around an Intel 8080/8085, Zilog Z80, or compatible CPU. CP/M 86 ran on the Intel 8086 and 8088. Some computers were suitable for CP/M as delivered. Others needed hardware modifications such as a memory expansion or modification, new boot ROMs, or the addition of a floppy disk drive.
A floppy-disk controller (FDC) is a hardware component that directs and controls reading from and writing to a computer's floppy disk drive (FDD). It has evolved from a discrete set of components on one or more circuit boards to a special-purpose integrated circuit (IC or "chip") or a component thereof.
3.5-inch and 5.25-inch drives connect to the floppy controller using a 34-conductor flat ribbon cable for signal and control. Most controllers support two floppy drives, although the Shugart standard supports up to four drives attached to a single controller. A cable could have 5.25-inch style connectors, 3.5-inch style connectors, or a ...
The floppy disk emulator can provide other systems access to the data on the emulated floppy in a number of ways: Direct access to some dedicated disk partition (e.g.: a 1.44MB partition on a USB key) Floppy file system translation (e.g.: FAT12 floppy ↔ USB key folder) Floppy disk images (e.g.: raw floppy ↔ .img/.iso USB key file)