Ads
related to: using a winch as hoist rope for truck
Search results
Results from the WOW.Com Content Network
Glider winch. Winch spool can be seen on the side of the truck, while cables to the right of the image are attached to the glider(s) being launched RCAF CH-149 Cormorant rescue helicopter, with rescue team on winch. Gliders are often launched using a winch mounted on a trailer or heavy vehicle. This method is widely used at many European ...
One end of the rope is attached to the crane frame, another to the winch. A rope and pulley system—that is, a block and tackle —is characterised by the use of a single continuous rope to transmit a tension force around one or more pulleys to lift or move a load—the rope may be a light line or a strong cable.
Hoist atop an elevator. A hoist is a device used for lifting or lowering a load by means of a drum or lift-wheel around which rope or chain wraps. It may be manually operated, electrically or pneumatically driven and may use chain, fiber or wire rope as its lifting medium.
AKERR is braided nylon rope which is designed to stretch, which makes AKERR tow ropes better able to pull stuck vehicles out of mud. Special hand and arm signals are used during the vehicle recovery to guide the participants where field of view or line-of-sight are restricted and to make communications feasible in noisy battlefield conditions.
The polyspastos, when worked by four men at both sides of the winch, could readily lift 3,000 kg (6,600 lb) (3 ropes x 5 pulleys x 4 men x 50 kg or 110 lb = 3,000 kg or 6,600 lb). If the winch was replaced by a treadwheel, the maximum load could be doubled to 6,000 kg (13,000 lb) at only half the crew, since the treadwheel possesses a much ...
The crane's hook is kept level by automatically paying out enough extra cable to compensate for this. This is also a purely mechanical linkage, arranged by the reeving of the hoist cables to the jib over a number of pulleys at the crane's apex above the cab, so that luffing the jib upwards allows more free cable and lowers the hook to compensate.
A dragline bucket system consists of a large bucket which is suspended from a large truss-like boom (or mast) with wire ropes. The bucket is maneuvered by means of a number of ropes and chains. The hoist rope, powered by large diesel or electric motors, supports the bucket and hoist-coupler assembly from the boom. The dragrope is used to draw ...
In this way the boom moves at the same speed as the winch veers the topping end of the halyard and hauls the lowering end of the halyard, and vice versa. The slewing ends are also wound on to another half-barrel. There is a third winch to hoist to cargo on the yoke. Runners decrease swing and rotation of the cargo.
Ads
related to: using a winch as hoist rope for truck