Ad
related to: flat stock with rounded edges and 2 holes of different dimensions
Search results
Results from the WOW.Com Content Network
Bar stock, also (colloquially) known as blank, slug or billet, [1] is a common form of raw purified metal, used by industry to manufacture metal parts and products. Bar stock is available in a variety of extrusion shapes and lengths. The most common shapes are round (circular cross-section), rectangular, square and hexagonal.
Fillet (mechanics) In mechanical engineering, a fillet (pronounced / ˈfɪlɪt /, like "fill it") is a rounding of an interior or exterior corner of a part. An interior or exterior corner, with an angle or type of bevel, is called a "chamfer". Fillet geometry, when on an interior corner is a line of concave function, whereas a fillet on an ...
The hole pattern is a square with holes along the sides only, holes are every 100 mm along the edges, and there are no holes in the square. The bracket is two strips that fit either the left and right or the top and bottom row of holes, and the holes along the two other edges of the square are not used at the same time.
For example, a metric 2520 component is 2.5 mm by 2.0 mm which corresponds roughly to 0.10 inches by 0.08 inches (hence, imperial size is 1008). Exceptions occur for imperial in the two smallest rectangular passive sizes. The metric codes still represent the dimensions in mm, even though the imperial size codes are no longer aligned.
Film perforations. Film perforations, also known as perfs and sprocket holes, are the holes placed in the film stock during manufacturing and used for transporting (by sprockets and claws) and steadying (by pin registration) the film. Films may have different types of perforations depending on film gauge, film format, and intended usage.
Magpul MOE M-LOK handguard on a user-assembled AR-15 semi-automatic rifle. M-LOK, for Modular Lock, is a firearm rail interface system developed and patented by Magpul Industries. The license is free-of-charge, but subject to an approval process. M-LOK allows for direct accessory attachment onto the "negative space" (hollow slot) mounting ...
A spotface or spot face is a machined feature in which a certain region of the workpiece (a spot) is faced, providing a smooth, flat, accurately located surface. This is especially relevant on workpieces cast or forged, where the spotface's smooth, flat, accurately located surface stands in distinction to the surrounding surface whose roughness ...
The flat faces are used to dress the ends of the frets, removing the sharp edges left after the frets are trimmed to length. Half round ring files taper in width and thickness, coming to a point, and are narrower than a standard half round. Used for filing inside of rings. Joint round edge files are parallel in width and thickness, with rounded ...
Ad
related to: flat stock with rounded edges and 2 holes of different dimensions