Search results
Results from the WOW.Com Content Network
The Ford HSC engine is an automobile gasoline engine from the Ford Motor Company, sold from 1984 until 1994. HSC stands for High Swirl Combustion.It was made in two displacements: 2.3 L and 2.5 L, and used in only two model lines: the Ford Tempo/Mercury Topaz and the Ford Taurus/Mercury Sable.
The N series is Honda's first automotive diesel engine, an inline-four for medium-sized vehicles. It uses common rail direct injection, which Honda brands as i-CTDi (Intelligent Common-rail Turbocharged Direct injection).
The HR13DDT is a 1.3 L (1,332 cc) all-aluminium direct injected and turbocharged straight-four engine equipped with lifetime timing chain, 16v DOHC, VVT, variable displacement oil pump, Stop-Start, regenerative braking, and Bore Spray Coating system (as installed in Nissan GT-R models), Bore: 72.2 mm (2.84 in), Stroke 81.3 mm (3.20 in). There ...
A kit car must pass its MOT test and have a valid car tax, or have a valid Statutory Off-Road Notification (SORN) declaration. As part of the IVA, a kit car can sometimes be permitted to assume the age of a single, older car (the donor car) if the major parts were taken from it in its construction. [8]
Bore and stroke size is 3.552 in × 4.165 in (90.2 mm × 105.8 mm), identical to the 5.4 L V8. Both 2-valve and 3-valve versions have been produced. The 6.8 L uses a split-pin crank with 72° firing intervals and a balance shaft gear driven by the left camshaft to quell vibrations inherent to a 90° bank angle V10 engine.
For the cylinder bores of hypoeutectic aluminum-silicon alloy blocks, PTWA's main advantages over cast iron liners are reduced weight and cost. The thinner bore surface also allows for more compact bore spacing, and can potentially provide better heat transfer. Automotive engines that use PTWA include Nissan VR38DETT, [3] and Ford Coyote.
The GM Ecotec engine, also known by its codename L850, is a family of all-aluminium inline-four engines, displacing between 1.2 and 2.5 litres.Confusingly, the Ecotec name was also applied to both the Buick V6 Engine when used in Holden Vehicles, as well as the final DOHC derivatives of the previous GM Family II engine; the architecture was substantially re-engineered for this new Ecotec ...
The 430 was replaced by the 462 cu in (7.6 L; 7,565 cc) engine in 1966. Bore and stroke were entirely different at 4.38 and 3.83 inches (111.3 and 97.3 mm) and the 462 MEL engine produced 340 hp (254 kW) and as much as 485 lb⋅ft (658 N⋅m) of torque. This engine was fitted with hydraulic lifters and a four-barrel Carter AFB carburetor.