Search results
Results from the WOW.Com Content Network
The decibel originates from methods used to quantify signal loss in telegraph and telephone circuits. Until the mid-1920s, the unit for loss was miles of standard cable (MSC). 1 MSC corresponded to the loss of power over one mile (approximately 1.6 km) of standard telephone cable at a frequency of 5000 radians per second (795.8 Hz), and matched closely the smallest attenuation detectable to a ...
Cellular Technology: WCDMA (DB-DC-HSDPA, DC-HSUPA), TD-SCDMA, CDMA 1x, EV-DO, GSM/EDGE; Downlink LTE: LTE Category 12 (600 Mbit/s). 3x20 MHz carrier aggregation. Maximum 6 spatial streams. Up to 256-QAM. Up to 4x4 MIMO on one carrier; Uplink LTE: LTE Category 13 (150 Mbit/s). 2x20 MHz carrier aggregation. Up to 64-QAM; Samsung 14 nm LPP process
Ampex tape recorders in the 1950s achieved 60 dB in practical usage, [26] In the 1960s, improvements in tape formulation processes resulted in 7 dB greater range, [28]: 158 and Ray Dolby developed the Dolby A-Type noise reduction system that increased low- and mid-frequency dynamic range on magnetic tape by 10 dB, and high-frequency by 15 dB ...
For very low-power systems, such as mobile phones, signal strength is usually expressed in dB-microvolts per metre (dBμV/m) or in decibels above a reference level of one milliwatt . In broadcasting terminology, 1 mV/m is 1000 μV/m or 60 dBμ (often written dBu).
The decibel watt (dBW or dB W) is a unit for the measurement of the strength of a signal expressed in decibels relative to one watt.It is used because of its capability to express both very large and very small values of power in a short range of number; e.g., 1 milliwatt = −30 dBW, 1 watt = 0 dBW, 10 watts = 10 dBW, 100 watts = 20 dBW, and 1,000,000 W = 60 dBW.
dBm or dB mW (decibel-milliwatts) is a unit of power level expressed using a logarithmic decibel (dB) scale respective to one milliwatt (mW). It is commonly used by radio, microwave and fiber-optical communication technicians & engineers to measure the power of system transmissions on a log scale , which can express both very large and very ...
Max DB size Max table size Max row size Max columns per row Max Blob/Clob size Max CHAR size Max NUMBER size Min DATE value Max DATE value Max column name size Informix Dynamic Server: ≈0.5 YB 12: ≈0,5YB 12: 32,765 bytes (exclusive of large objects) 32,765 4 TB 32,765 14: 10 125 13: 01/01/0001 10: 12/31/9999 128 bytes Ingres: Unlimited ...
The unit dB FS or dBFS is defined in AES Standard AES17-1998, [13] IEC 61606, [14] and ITU-T Recs. P.381 [15] and P.382, [16] such that the RMS value of a full-scale sine wave is designated 0 dB FS. This means a full-scale square wave would have an RMS value of +3 dB FS.