Search results
Results from the WOW.Com Content Network
Brake horsepower (bhp) is the power measured using a brake type (load) dynamometer at a specified location, such as the crankshaft, output shaft of the transmission, rear axle or rear wheels. [ 30 ] In Europe, the DIN 70020 standard tests the engine fitted with all ancillaries and the exhaust system as used in the car.
Torque measurement is somewhat complicated since there are two machines in tandem - an inline torque transducer is the preferred method of torque measurement in this case. An eddy-current or waterbrake dynamometer, with electronic control combined with a variable frequency drive and AC induction motor, is a commonly used configuration of this type.
Engine power is the power that an engine can develop. It can be expressed in power units, most commonly kilowatt, metric horsepower (often abbreviated PS), or horsepower.In terms of internal combustion engines, the engine power usually describes the rated power, which is a power output that the engine can maintain over a long period of time according to a certain testing method, for example ...
Mercedes-Benz estimated that these changes, with vehicle modifications such as a stop-start system, give the 4.7–litre M278 22% lower fuel consumption and CO 2 emissions than the 5.5–litre M273 while producing more power 320 kW (435 PS; 429 bhp) versus 285 kW (387 PS; 382 bhp) and torque 700 N⋅m (516 lb⋅ft) versus 530 N⋅m (391 lb⋅ft).
With a governor set to 8% accuracy, the rated power is 21.33 kW (29 bhp; 29 PS) at 3000 min −1, the highest torque is 69.63 N⋅m (51 lbf⋅ft) at 2000 min −1. [4] For other applications, the power and torque output may vary, e.g. On the Beetle produced 41 PS (40 bhp; 30 kW) at 3900 rpm and 88 N⋅m (65 lbf⋅ft) of torque at 2400 rpm.
Speed has dropped out of the equation, and the only variables are the torque and displacement volume. Since the range of maximum brake mean effective pressures for good engine designs is well established, we now have a displacement-independent measure of the torque-producing capacity of an engine design – a specific torque of sorts.
The main difference between the Land Rover and TVR versions lies in the usage of Land Rover 3.9 pistons (usually of the 9.35:1 compression version, some report of low compression (8.13:1) pistons being used in a small number of engines) of which the tops were machined down to match the deck height, thus increasing static compression ratio.
The 4B11T offers a broader torque curve, producing more torque than the 4G63 at all engine speeds, helped by the engine's square bore and stroke design, both measure 86 mm (3.39 in). Redline tachometer hashes start at 7,000 rpm, with a fuel cutout (true redline) at 7600 rpm to protect the engine.