Search results
Results from the WOW.Com Content Network
A rack and pinion has roughly the same purpose as a worm gear with a rack replacing the gear, in that both convert torque to linear force. However the rack and pinion generally provides higher linear speed — since a full turn of the pinion displaces the rack by an amount equal to the pinion's pitch circle whereas a full rotation of the worm screw only displaces the rack by one tooth width.
The Pilatus Railway is the steepest rack railway in the world, with a maximum gradient of 48% and an average gradient of 35%. Functioning of the rack and pinion on the Strub system. A rack railway (also rack-and-pinion railway, cog railway, or cogwheel railway) is a steep grade railway with a toothed rack rail, usually between the running rails.
The Nilgiri is the only rack railway in India, and it uses an Abt rack system. The ABT system requires the use of special steam locomotives . The line contains 208 curves, 16 tunnels, and 250 bridges, causing the uphill journey along the route to take about 290 min (4.8 h), while the downhill journey takes 215 min (3.6 h).
The Digital Chart of the World (DCW) is a comprehensive digital map of Earth. It is the most comprehensive geographical information system (GIS) global database that is freely available as of 2006, although it has not been updated since 1992.
The cog, or rack and pinion, system that allows the locomotive to climb Mount Washington. Located in the museum. The rack rail design used is one of Marsh's own inventions, using a ladder-like rack with open bar rungs engaged by the teeth of the cog wheel. This system allows snow and debris to fall through the rack, rather than lodging in it. [42]
The water is drained at the bottom, and the process repeats with the cars exchanging roles. The movement is controlled by a brakeman using the brake handle of the rack and pinion system engaged with the rack mounted between the rails. [2] [6] The Bom Jesus funicular built in 1882 near Braga, Portugal is one of the extant systems of this type.
In many cases, such as remote controlled toys, the pinion is also the drive gear for a reduction in speed, since electric motors operate at higher speed and lower torque than desirable at the wheels. However the reverse is true in watches, where gear trains commence with a high-torque, low-speed spring and terminate in the fast-and-weak escapement.
The 15th century also saw the introduction of cranked rack-and-pinion devices, called cranequins, which were fitted to the crossbow's stock as a means of exerting even more force while spanning the missile weapon (see right). [48] In the textile industry, cranked reels for winding skeins of yarn were introduced. [41]