Search results
Results from the WOW.Com Content Network
The Elite features a strut-braced high-wing, three seats, tricycle landing gear and a single engine in tractor configuration. [1] [2] [5] [6] The aircraft is made from aluminum sheet. Its 30.3 ft (9.2 m) span wing is supported by single lift struts. The occupants are accommodated in an enclosed cabin of 44 in (111.8 cm) width, with doors for ...
The aircraft was designed for a large cabin and ease-of-entry. The Sling High Wing has much parts commonality with the Sling TSi, including the cantilever wing design, with the major difference in the center section to accommodate the high-wing design. [4] [5] Cabin width is 46 in (117 cm). [5] The first flight of the prototype was in December ...
Data from Kitplanes, Cliche and Purdy General characteristics Crew: one Capacity: one passenger Length: 22 ft 6 in (6.86 m) Wingspan: 30 ft 0 in (9.14 m) Height: 6 ft 2 in (1.88 m) Wing area: 160 sq ft (15 m 2) Empty weight: 450 lb (204 kg) Gross weight: 1,000 lb (454 kg) Fuel capacity: 10 US gallons (38 litres) Powerplant: 1 × Rotax 582 twin cylinder, two-stroke aircraft engine, 64 hp (48 kW ...
The aircraft was developed in 2018. The Sling TSi is an all-metal, low-wing, fixed tricycle gear homebuilt aircraft. The airplane is equipped with the new Rotax 915iS engine and was the inspiration for the designation of TSi. Parts of the wings and fuselage were reinforced and outfitted with flush riveting for increased strength and reduced ...
On the early models the pilot is accommodated on a sling seat suspended from the main wing keel tube, to allow weight-shift control. The standard engine supplied was the single cylinder, two-stroke Yamaha KT-100S of 15 hp (11 kW), although a Kawasaki 440 snowmobile engine producing 38 hp (28 kW) was optional.
The speed wing restricts the aircraft's useful load to 170 lb (77 kg), while the standard wing allows 250 lb (113 kg). [1] [5] The standard engine is the 40 hp (30 kW) Rotax 447, although engines of 28 to 52 hp (21 to 39 kW) can be used. The manufacturer estimates that a builder will take 100–120 hours to complete this aircraft from the kit.
It is made from 7075-T6 aluminum tubing, with the control bar and kingpost made from 6061-T6 aluminum. The single-surface wing is covered in Dacron sailcloth. Its 39.0 ft (11.9 m) span wing is cable braced from a single kingpost. The nose angle is 115°, wing area is 330 sq ft (30.7 m 2) and the aspect ratio is 5:1. Pilot hook-in weight range ...
The skin of an aircraft is the outer surface which covers much of its wings and fuselage. The most commonly used materials are aluminum and aluminium alloys with other metals, including zinc , magnesium and copper .