Search results
Results from the WOW.Com Content Network
The arrival of the Duratec-E engine in the fifth generation Fiesta range in 2002 signalled the end of the engine's use in production vehicles after a 44-year career, although the Valencia derivative remained in limited production in Brazil, as an industrial use engine by Ford's Power Products division, where it is known as the VSG-411 and VSG-413.
The early Mark III Cortinas came with the same 1300 and 1600 cc engines as the Mark II Cortinas, except for the 1600 cc GXL and GT. These engines are known as the Kent, crossflow engine or overhead valve (OHV) engine. Also, the 2000 cc engine, the single overhead cam engine, now known as the Pinto engine, was introduced.
Like its other engines, increases in power necessitated new engine ID codes. Only the Phaeton and Touareg in the Volkswagen Passenger Cars marque have used a V8 engine. ID code- AXQ 4.2-litre V8, 228 kW (310 PS; 306 hp) — 2002–2007 Volkswagen Touareg ID code- BGH, BGJ 4.2-litre V8, 246 kW (334 PS; 330 hp) — 2003–2006 Volkswagen Phaeton
H engines summarize two families of gasoline engines, the smaller with a max. cylinder bore of 72.2 mm and a larger family with typically 78 mm bore: The smaller family covers 0.9 - 1.33 litres of swept volume and was co-developed by Renault, Mercedes-Benz and Nissan.
The 1.8 L (1,798 cc) Pinto engine was introduced in 1984 as a replacement for the "old" 1.6 L. The engine had an 86.2 mm (3.39 in) bore and 76.95 mm (3.03 in) stroke giving the displacement of 1.8 L (1,796 cc). Output was 66 kW (89 hp) of power and 140 N⋅m (103 lb⋅ft). Fuel was supplied by the Pierburg 2E3 28/32 carburetor.
The first Lotus Twin Cam engine was fired up on a test bench on October 10, 1961. [7] This engine broke a crankshaft during testing; a failure blamed on the three main-bearing block. The first test vehicle to receive a Twin Cam was a left hand drive Ford Anglia, and the engine was installed on 18 January 1962.
The CB engine was first introduced in 2020 with the second-generation Levorg. [28] [29] According to Subaru, CB stands for Concentration/Compact Boxer. [30] The first engine in the series is designated CB18, a 1.8 litre dual overhead cam 16-valve engine featuring dual AVCS with gasoline direct injection and a turbocharger. Bore and stroke are ...
The 1600 Crossflow produces about 100 hp (75 kW), thanks to a number of official Ford Performance Center parts. [7] [20] As a side note, six steel-chassied Marcos 1600 (with the Mark 2 "A711M" Crossflow engines) were built in late 1971 and early 1972. Built to provide a low-priced entry level version, these were rather spartan, with stripped ...