Search results
Results from the WOW.Com Content Network
Presence of a 25-pin D-sub connector does not necessarily indicate an RS-232-C compliant interface. For example, on the original IBM PC, a male D-sub was an RS-232-C DTE port (with a non-standard current loop interface on reserved pins), but the female D-sub connector on the same PC model was used for the parallel "Centronics" printer port .
Connectors on this cable would be designated: 1A1W35P1; 1A1W35P2; ASME Y14.44-2008 continues the convention of Plug P and Jack J when assigning references for electrical connectors in assemblies where a J (or jack) is the more fixed and P (or plug) is the less fixed of a connector pair, without regard to the gender of the connector contacts.
A male D-subminiature DE-9 connector on an IBM PC compatible computer (with serial port symbol) used for an RS-232 serial port A female D-subminiature DE-9 connector on an RS-232 cable. A serial port is a serial communication interface through which information transfers in or out sequentially one bit at a time. [1]
A digital current loop uses the absence of current for high (space or break), and the presence of current in the loop for low (mark). [1] This is done to ensure that on normal conditions there is always current flowing and in the event of a line being cut the flow stops indefinitely, immediately raising the alarm of the event usually as the heavy noise of the teleprinter not being synchronized ...
The connector specification is defined by the ISO document 4903. [3] At the time, most physical layer protocols such as RS-232-C and RS-449 use analog signaling. X.21 was first introduced as a means to provide a digital signaling interface for telecommunications.
COM port (DE-9 connector). COM (communication port) [ 1 ] [ 2 ] is the original, yet still common, name of the serial port interface on PC-compatible computers . It can refer not only to physical ports, but also to emulated ports, such as ports created by Bluetooth or USB adapters .
RS-423 is the common short form title of American National Standards Institute (ANSI) standard ANSI/TIA/EIA-423-B Electrical Characteristics of Unbalanced Voltage Digital Interface Circuits and its international equivalent ITU-T Recommendation T-REC-V.10, [3] also known as X.26.
Two 44-pin edge connector sockets (blue objects) and matching circuit board. The Edge connector is 3.5 in (89 mm) long, with 22 contacts on each side Edge connector for PCIe x4. An edge connector is the portion of a printed circuit board (PCB) consisting of traces leading to the edge of the board that are intended to plug into a matching socket.