Ad
related to: rim groove
Search results
Results from the WOW.Com Content Network
The rim on a "rimless" case is almost or exactly the same diameter as the base of the case. A recess formed between the rim and the body of the cartridge is known as an extractor groove, allowing the case to be grasped by an extractor after being fired.
Tire bead is the term for the edge of a tire that sits on the rim. Wheels for automobiles, bicycles, etc. are made with a small slot or groove into which the tire bead sits. When the tire is properly inflated, the air pressure within the tire keeps the bead in this groove. Reducing tire air pressure is a frequent practice among off-road vehicle ...
Rim diameter.608 in (15.4 mm) ... Arsenal loadings for the .45-70-405 and .45-70-500 government cartridges generally used groove diameter grease groove bullets of ...
A sheave or pulley wheel is a pulley using an axle supported by a frame or shell (block) to guide a cable or exert force. A pulley may have a groove or grooves between flanges around its circumference to locate the cable or belt. The drive element of a pulley system can be a rope, cable, belt, or chain.
The .22 Winchester Magnum Rimfire, also known as the .22 WMR, .22 Magnum, .22 WMRF, .22 MRF, [2] or .22 Mag, is a rimfire cartridge.Originally loaded with a bullet weight of 40 grains (2.6 g) delivering velocities in the 2,000 feet per second (610 m/s) range from a rifle barrel, .22 WMR is now loaded with bullet weights ranging from 50 grains (3.2 g) at 1,530 feet per second (470 m/s) to 30 ...
New Mail Ladies Safety bicycle, circa 1891, with solid rubber tires A tubed, clincher tire showing the inner tube protruding between the tire and the rim Tubular tire rolled from rim to show glue between them Clincher cross section schematic with 1: rim, 2: rim strip, 3: rim braking surface, 4: bead core, 5: inner tube, 6: casing, 7: tread
A depression on the entire circumference of a cast or machined wheel, a pulley or sheave. This depression may receive a cable, a rope or a belt. A longitudinal channel formed in a hot rolled rail profile such as a grooved rail. This groove is for the flange on a train wheel. Grooves were used by ancient Roman engineers to survey land. [1]
The most common is the "normal" rimshot, which is played with the tip (bead) of the stick held about three inches (about 8 cm) from the rim. This produces a prominent, accented tone. The second is the "ping shot", where the bead is struck about one inch (2.5 cm) from the rim. This produces a high-pitched sound.
Ad
related to: rim groove